EUVIMED · CrossrefJournal
Metals
ISSN 2075-4701 · MDPI AG
Latest articles
Hydrogen Embrittlement of Metals: Behaviors, Mechanisms, and Engineering Practice
Material Flow Behavior and Microstructure Evolution of Magnesium–Lithium Alloy Surface During Water-Cooled Friction Stir Processing
Effects of Post-Weld Heat Treatment on Microstructural Evolution and Mechanical Properties of Friction Stir Welded 6061-T6 Aluminium Alloy Joints
Toughness Effect and Strengthening Mechanisms of Manifold Microstructures on Hot Isostatic Pressing Ti55541 Metastable β-Titanium Alloy
A Novel Fe-M(Nb,Mo,Cr)-C-B Coating on AISI 4140 Steel: Microstructural, Indentation and Wear Characterization
Corrosion Resistance of Zinc Flake Coatings: Effect of Flake Morphology and Lamellar Microstructure
Composition-Dependent Oxidation Response of Ti65 Alloy Beneath Natural Volcanic-Ash Deposits at 650 °C
Influence of Residual Stresses on Fatigue Crack Propagation Behaviour in Welded Aluminium Alloys
Learning the Ductile-to-Brittle Transition Curve of Steels: Direct Machine Learning Versus Empirical-Equation-Constrained Models with Validation on In-House Cast Steels
Effect of Microwave Heating on Change in the Magnetic Properties of Neutralization Sludge
Compositionally Matched Laser Cladding for Repairing Inconel 718: Process Window, Solidification Behavior and Wear Performance
Enhancing Durability and Resistance to Wear and Corrosion of AISI 431 Martensitic Stainless Steel for Sustainable Engineering Applications
Effects of Al Substitution for Si on Lath Refinement, Retained Austenite Stability, and Strength–Ductility Balance in Carbide-Free Bainitic Steels
Multi-Field Coupled Degradation and Life Prediction of Low-Temperature Corrosion-Resistant Steel: A Physics-Informed Neural Network (PINN) Approach
Comparison of the Mechanical Behavior of AA5052 and AA6261 Dissimilar Joints by Friction- Stir Welding and Gas Metal Arc Welding
Effect of Annealing Temperature on Recrystallization Behavior of 0.25 mm Thin-Gauge Non-Oriented Electrical Steel
Effect of Boron-Free Niobium Addition on the Hot Tearing Susceptibility of the AlSi5Cu2Mg Alloy
Study on the Effect of Ce Doping on the Microstructure and Properties of Ti-Based 25 MPa Hydrogen Compression Materials
Low-Temperature, Large-Area Sinter-Bonding of Dendritic Cu Paste for Substrate-to-Base-Plate Joints
Influence of the Hematite/Limonite Ratio on Sinter Properties and the Underlying Microscopic Mechanism
Reinforcement-Matrix Interactions and Strengthening Model Validity in Magnesium Matrix Composites: A Critical Review
Microstructure, Mechanical Properties and Electrical Conductivity of an Al-Fe-Cu-Mg Alloy
Selective Recovery of Lithium from Waste Lithium Aluminosilicate Glass via Mixed Sulfate Roasting and Water Leaching
Enhanced Environmental Durability of an AlN-Modified Aluminium Phosphate Binder Through PVA Incorporation
Stage-Based Total Fatigue Life Prediction of TC11 Titanium Alloy at 400 °C Considering Structural Size Effects
Influence of Laser-Induced Surface Texturing on the Corrosion Resistance of PEO-Coated Biodegradable Magnesium Alloys
Numerical Investigation and Model Recalibration for Web-Post Buckling of Stainless Steel Cellular Beams
The Influence of Support Roughness on Shape Distortion of Binder-Jetted Parts During Sintering—Experimental and Modelling Analysis
Prediction and Control of Welding Deformation in Crane Booms Based on the Inherent Strain Method and Pre-Deformation Method
Effect of Nb-Ti Microalloying Balance on Microstructural Evolution and Mechanical Properties of Complex Phase Steel
EUVIMED