EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Boron-Free Niobium Addition on the Hot Tearing Susceptibility of the AlSi5Cu2Mg Alloy

Martina Sýkorová, Dana Bolibruchová, Marek Matejka

Metals · 17.11.2026 · 16 (11) · 1261

DOI: 10.3390/met16111261 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 17.11.2026. Verfasst von Martina Sýkorová und 2 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Cultural and Educational Grant Agency (KEGA) of the Ministry of Education, Science, Research and Sport of the Slovak Republic, Grant System of the University of Žilina.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The AlSi5Cu2Mg alloy for cylinder-head castings is known for its pronounced susceptibility to hot tearing. This study examines how niobium additions affect the hot tearing susceptibility (HTS) of this alloy. Niobium was introduced via an AlNb10 master alloy in nominal amounts of 0.10, 0.15 and 0.20 wt.% (measured 0.049, 0.063 and 0.076 wt.%). HTS was evaluated quantitatively, by three variants of the hot tearing index (HTI) determined from tears on four arms of a five-arm restrained-contraction mould, and qualitatively, from the load recorded on the fifth, anchored arm. All niobium additions reduced the HTI values. The lowest values were obtained for the nominal 0.15 wt.% addition (HTI1 = 0.18, HTI2 = 0.60 and HTI3 = 0.17 compared with 0.93, 2.35 and 1.91 for the reference alloy). In the qualitative evaluation, this was the only alloy in which no anchored arm separated. In contrast, two anchored arms of the 0.20 wt.% Nb alloy separated immediately and a third transferred less than 120 N. This occurred despite the finest dendritic structure (secondary dendrite arm spacing 16.58 versus 25.76 µm). Niobium can therefore reduce the HTS of the AlSi5Cu2Mg alloy, with the most favourable effect at a nominal addition of 0.15 wt.%.

Förderung

  • Cultural and Educational Grant Agency (KEGA) of the Ministry of Education, Science, Research and Sport of the Slovak Republic
  • Grant System of the University of Žilina

Zitieren

APA

Sýkorová, M., Bolibruchová, D., & Matejka, M. (2026). Effect of Boron-Free Niobium Addition on the Hot Tearing Susceptibility of the AlSi5Cu2Mg Alloy. Metals, 16(11), 1261. https://doi.org/10.3390/met16111261

Vancouver

Sýkorová M, Bolibruchová D, Matejka M. Effect of Boron-Free Niobium Addition on the Hot Tearing Susceptibility of the AlSi5Cu2Mg Alloy. Metals. 2026;16(11):1261. doi:10.3390/met16111261

BibTeX
@article{Skorov2026,
  author = {Sýkorová, Martina and Bolibruchová, Dana and Matejka, Marek},
  title = {Effect of Boron-Free Niobium Addition on the Hot Tearing Susceptibility of the AlSi5Cu2Mg Alloy},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1261},
  doi = {10.3390/met16111261}
}
Kostenlos starten →