EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Effect of Ce Doping on the Microstructure and Properties of Ti-Based 25 MPa Hydrogen Compression Materials

Yuan Deng, Yongguang Wang, Yi Huangfu, Tao Deng, Xin Zhao, Long Luo

Metals · 17.11.2026 · 16 (11) · 1262

DOI: 10.3390/met16111262 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 17.11.2026. Verfasst von Yuan Deng und 5 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Major Scientific and Technological Projects in the Inner Mongolia Autonomous Region, Natural Science Foundation of Inner Mongolia, China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study systematically investigates the effect of Ce doping on the microstructure and hydrogen compression performance of Ti-based AB2-type Ti0.94Zr0.08Cr1.0Mn0.4Fe0.6Cex (x = 0, 0.01, 0.02, 0.03, 0.04) alloys for hydrogen compression targeting 25 MPa. The results show that Ce doping does not alter the main phase of the alloys, which remains the C14 Laves phase. The effect of Ce doping on lattice parameters is negligible, and Ce exists mainly in two forms: elemental Ce and CeO2. Within the test temperature range of −80 to −50 °C, the hydrogen storage capacity first increases and then decreases as the Ce doping increases, while the hydrogen absorption kinetics are noticeably improved. Pressure–composition isotherms exhibit a single plateau, and Ce doping lowers the plateau pressure. Ce doping significantly reduces the slope factor and hysteresis factor, and the absolute values of both absorption and desorption enthalpies decrease with increasing Ce content. The compression factor did not vary monotonically: based on van’t Hoff extrapolation to 30 °C for absorption and 80 °C for desorption, it peaked at 2.05 when x = 0.02, while the x = 0.03 alloy achieves a desorption pressure of 57.24 MPa at 80 °C. Overall, Ce doping at x = 0.02 is the optimal content among the series of alloys for tuning the plateau pressure, improving plateau flatness, reducing hysteresis, and enhancing hydrogen compression performance, demonstrating promising potential for low-grade heat-driven hydrogen compression in refueling infrastructure.

Förderung

  • Major Scientific and Technological Projects in the Inner Mongolia Autonomous Region
  • Natural Science Foundation of Inner Mongolia, China

Zitieren

APA

Deng, Y., Wang, Y., Huangfu, Y., Deng, T., Zhao, X., & Luo, L. (2026). Study on the Effect of Ce Doping on the Microstructure and Properties of Ti-Based 25 MPa Hydrogen Compression Materials. Metals, 16(11), 1262. https://doi.org/10.3390/met16111262

Vancouver

Deng Y, Wang Y, Huangfu Y, Deng T, Zhao X, Luo L. Study on the Effect of Ce Doping on the Microstructure and Properties of Ti-Based 25 MPa Hydrogen Compression Materials. Metals. 2026;16(11):1262. doi:10.3390/met16111262

BibTeX
@article{Deng2026,
  author = {Deng, Yuan and Wang, Yongguang and Huangfu, Yi and Deng, Tao and Zhao, Xin and Luo, Long},
  title = {Study on the Effect of Ce Doping on the Microstructure and Properties of Ti-Based 25 MPa Hydrogen Compression Materials},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1262},
  doi = {10.3390/met16111262}
}
Kostenlos starten →