Influence of the Hematite/Limonite Ratio on Sinter Properties and the Underlying Microscopic Mechanism
Metals · 16.11.2026 · 16 (11) · 1255
DOI: 10.3390/met16111255 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 16.11.2026. Verfasst von Weijian Tian und 6 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
China’s iron and steel industry relies heavily on imported ores, whose hematite/limonite blending ratio markedly affects sinter strength and metallurgical properties; however, how the ratio acts through microscopic mineral phases remains insufficiently clarified. To this end, six imported iron ore fines were characterized for their high-temperature bonding phase properties (compressive strength of compacts roasted at 1280 °C), and seven gradient ratio schemes (30–60% limonite) were designed for sinter pot tests; the sinters were analyzed by XRD, optical microscopy and SEM-EDS. The bonding phase strength of hematite-type fines was on average higher than that of limonite-type fines (1364.14 N vs. 1011.15 N), although some limonite fines are heavier than some hematite fines. Techno-economic indices and metallurgical properties responded asynchronously to the ratio: the highest yield, productivity coefficient and vertical sintering speed were obtained at 45% limonite, whereas RDI+6.3 deteriorated sharply at 60% limonite (falling from 51.97% at 55% to 43.16%). Fe2O3 content first decreased and then increased with the limonite ratio, and reduction degradation was governed by the mode of occurrence of Fe2O3 rather than its total content; skeletal secondary hematite recrystallized from the liquid phase triggered crack propagation during reduction. Accordingly, limiting the limonite proportion to 40–45% (not exceeding 55%) while promoting acicular silico-ferrite of calcium and aluminum (SFCA) and suppressing skeletal secondary hematite is recommended for industrial ore blending.
Zitieren
APA
Tian, W., Lu, K., Wang, N., Zhang, L., Zhao, W., Cai, Z., & Bai, H. (2026). Influence of the Hematite/Limonite Ratio on Sinter Properties and the Underlying Microscopic Mechanism. Metals, 16(11), 1255. https://doi.org/10.3390/met16111255
Vancouver
Tian W, Lu K, Wang N, Zhang L, Zhao W, Cai Z, et al. Influence of the Hematite/Limonite Ratio on Sinter Properties and the Underlying Microscopic Mechanism. Metals. 2026;16(11):1255. doi:10.3390/met16111255
BibTeX
@article{Tian2026,
author = {Tian, Weijian and Lu, Kuan and Wang, Ning and Zhang, Lei and Zhao, Wei and Cai, Zhiqiang and Bai, Hao},
title = {Influence of the Hematite/Limonite Ratio on Sinter Properties and the Underlying Microscopic Mechanism},
journal = {Metals},
year = {2026},
volume = {16},
number = {11},
pages = {1255},
doi = {10.3390/met16111255}
}
EUVIMED