EUVIMED · CrossrefJournal
Metals
ISSN 2075-4701 · MDPI AG
Latest articles
Influence of Residual Stresses on Fatigue Crack Propagation Behaviour in Welded Aluminium Alloys
Enhancing Durability and Resistance to Wear and Corrosion of AISI 431 Martensitic Stainless Steel for Sustainable Engineering Applications
Effects of Al Substitution for Si on Lath Refinement, Retained Austenite Stability, and Strength–Ductility Balance in Carbide-Free Bainitic Steels
Multi-Field Coupled Degradation and Life Prediction of Low-Temperature Corrosion-Resistant Steel: A Physics-Informed Neural Network (PINN) Approach
Comparison of the Mechanical Behavior of AA5052 and AA6261 Dissimilar Joints by Friction- Stir Welding and Gas Metal Arc Welding
Effect of Annealing Temperature on Recrystallization Behavior of 0.25 mm Thin-Gauge Non-Oriented Electrical Steel
Effect of Boron-Free Niobium Addition on the Hot Tearing Susceptibility of the AlSi5Cu2Mg Alloy
Study on the Effect of Ce Doping on the Microstructure and Properties of Ti-Based 25 MPa Hydrogen Compression Materials
Low-Temperature, Large-Area Sinter-Bonding of Dendritic Cu Paste for Substrate-to-Base-Plate Joints
Influence of the Hematite/Limonite Ratio on Sinter Properties and the Underlying Microscopic Mechanism
Reinforcement-Matrix Interactions and Strengthening Model Validity in Magnesium Matrix Composites: A Critical Review
Microstructure, Mechanical Properties and Electrical Conductivity of an Al-Fe-Cu-Mg Alloy
Selective Recovery of Lithium from Waste Lithium Aluminosilicate Glass via Mixed Sulfate Roasting and Water Leaching
Enhanced Environmental Durability of an AlN-Modified Aluminium Phosphate Binder Through PVA Incorporation
Stage-Based Total Fatigue Life Prediction of TC11 Titanium Alloy at 400 °C Considering Structural Size Effects
Influence of Laser-Induced Surface Texturing on the Corrosion Resistance of PEO-Coated Biodegradable Magnesium Alloys
Numerical Investigation and Model Recalibration for Web-Post Buckling of Stainless Steel Cellular Beams
The Influence of Support Roughness on Shape Distortion of Binder-Jetted Parts During Sintering—Experimental and Modelling Analysis
Prediction and Control of Welding Deformation in Crane Booms Based on the Inherent Strain Method and Pre-Deformation Method
Effect of Nb-Ti Microalloying Balance on Microstructural Evolution and Mechanical Properties of Complex Phase Steel
Influence of Solution Temperature and Cooling Route on High-Temperature Tensile Deformation and Fracture of a Novel Fourth-Generation Powder Metallurgy Ni-Based Superalloy at 830 °C
Surface Sulfur Conversion of Chalcopyrite for Efficient Kerosene Desorption and Cu–Mo Flotation Separation
Microstructural Evolution and Work-Hardening Behaviour in a High-Nitrogen Nickel-Free Stainless Steel
Molten Bath Flow Characteristics and Metallurgical Performance of Bottom Injection in a 300 t Basic Oxygen Furnace
Advances in Entropic and Meta-Metal Materials
Isothermal Phase Relations in the CaO-Al2O3-CeO2-MgO Quaternary Oxide System at 1500 °C
Solidification Patterns of Ductile and Grey Cast Irons Produced from the Same Base Iron Melt: Thermal (Cooling-Curve) Analysis
Comparative Reduction Roasting of Mn-Rich Spent NCM Black Mass After NaOH Pretreatment for Selective Metal Recovery: Self-Reduction, CO, and H2 Pathways
Study of Structure Formation and Mechanical Properties in an Al-Cu-Ce Alloy with Additives of SiC, TiC and TiB2 in the Process of Laser Exposure
Electrochemical Corrosion Behavior, Mathematical Modeling, and Multicriteria Assessment of Ti-Alloyed Martensitic Stainless Steels
EUVIMED