EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Learning the Ductile-to-Brittle Transition Curve of Steels: Direct Machine Learning Versus Empirical-Equation-Constrained Models with Validation on In-House Cast Steels

Namhyuk Seo, Ji-Woo Park, Junghoon Yang, Seok-Jae Lee, Min-Su Kim

Metals · 19.11.2026 · 16 (11) · 1269

DOI: 10.3390/met16111269 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 19.11.2026. Verfasst von Namhyuk Seo und 4 weiteren Autor:innen. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National IT Industry Promotion Agency, Jeonbuk Special Self-Governing Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Charpy impact energy of ferritic steels varies sigmoidally with temperature, and the resulting ductile-to-brittle transition (DBT) curve is commonly described by a hyperbolic-tangent (tanh) equation. This study compares the following two ways of learning this curve from heterogeneous literature data: direct regression of the impact energy, and an equation-constrained approach in which the learner predicts the four tanh parameters and is trained end-to-end through the equation. A database of 604 Charpy V-notch measurements from 40 publications (58 steels) was compiled and supplemented with physics-derived descriptors, and six tree and neural-network models were tuned under the same protocol. Under random cross-validation the five models that use all measurements reach R2 = 0.71–0.89, but when whole steels are held out, R2 falls to 0.12–0.32. The equation-constrained models return smooth sigmoids with interpretable parameters at a similar accuracy under the grouped schemes, but the transition temperatures predicted for unseen steels remain uncertain (mean absolute errors of 35–41 °C). On four in-house quenched-and-tempered cast steels tested between −40 and 25 °C, the equation-constrained network had the lowest mean absolute error (28 J; other models 44–55 J), a ranking that depends on network settings and on the values assumed for unanalysed elements. Adaptation with three cast steels reduced the error on the fourth to 21–29 J for all models, no lower than a curve fitted to the cast data alone. SHAP attributed the transition temperature and the upper-shelf energy mainly to carbon and tempering.

Förderung

  • National IT Industry Promotion Agency
  • Jeonbuk Special Self-Governing Province

Zitieren

APA

Seo, N., Park, J., Yang, J., Lee, S., & Kim, M. (2026). Learning the Ductile-to-Brittle Transition Curve of Steels: Direct Machine Learning Versus Empirical-Equation-Constrained Models with Validation on In-House Cast Steels. Metals, 16(11), 1269. https://doi.org/10.3390/met16111269

Vancouver

Seo N, Park J, Yang J, Lee S, Kim M. Learning the Ductile-to-Brittle Transition Curve of Steels: Direct Machine Learning Versus Empirical-Equation-Constrained Models with Validation on In-House Cast Steels. Metals. 2026;16(11):1269. doi:10.3390/met16111269

BibTeX
@article{Seo2026,
  author = {Seo, Namhyuk and Park, Ji-Woo and Yang, Junghoon and Lee, Seok-Jae and Kim, Min-Su},
  title = {Learning the Ductile-to-Brittle Transition Curve of Steels: Direct Machine Learning Versus Empirical-Equation-Constrained Models with Validation on In-House Cast Steels},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1269},
  doi = {10.3390/met16111269}
}
Kostenlos starten →