EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Material Flow Behavior and Microstructure Evolution of Magnesium–Lithium Alloy Surface During Water-Cooled Friction Stir Processing

Jiqiang Zhai, Wenzhong Cai, Lihua Zhu, Weijia Zheng, Xiaohuan Liu, Mingyan Liu

Metals · 20.11.2026 · 16 (11) · 1273

DOI: 10.3390/met16111273 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 20.11.2026. Verfasst von Jiqiang Zhai und 5 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Technology Research and Development Program of Shandong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-lithium dual-phase Mg–Li alloys exhibit excellent lightweighting potential, but their relatively low strength limits practical applications. In this study, water-cooled friction stir processing (FSP) of rolled LA103Z was examined by combining experiments with three-dimensional finite element analysis in Deform 3D. The simulations were used to investigate material-flow trajectories and the spatial and temporal distributions of temperature, stress, and strain under the investigated processing conditions. The tracked material points exhibited a truncated-conical flow region, while the predicted temperature and accumulated strain were generally higher on the advancing side than on the retreating side. Tool diameter and rotational speed had stronger effects on the predicted peak-temperature level than traverse speed, whereas traverse speed mainly influenced the heating and cooling rates and temperature uniformity. The local thermomechanical histories were subsequently introduced into a previously established CDRX–ISV model for LA103Z to calculate β-Li grain-size and regularized dislocation-density evolution. The predicted grain sizes were compared with experimental measurements; the calculated dislocation-density histories are presented as model outputs and were not independently verified by direct dislocation measurements. The main contribution is the spatially resolved analysis of material flow and thermomechanical histories and their sequential use in microstructure-evolution modeling, rather than the first demonstration of FSP-induced refinement or strengthening in LA103Z.

Förderung

  • Key Technology Research and Development Program of Shandong Province

Zitieren

APA

Zhai, J., Cai, W., Zhu, L., Zheng, W., Liu, X., & Liu, M. (2026). Material Flow Behavior and Microstructure Evolution of Magnesium–Lithium Alloy Surface During Water-Cooled Friction Stir Processing. Metals, 16(11), 1273. https://doi.org/10.3390/met16111273

Vancouver

Zhai J, Cai W, Zhu L, Zheng W, Liu X, Liu M. Material Flow Behavior and Microstructure Evolution of Magnesium–Lithium Alloy Surface During Water-Cooled Friction Stir Processing. Metals. 2026;16(11):1273. doi:10.3390/met16111273

BibTeX
@article{Zhai2026,
  author = {Zhai, Jiqiang and Cai, Wenzhong and Zhu, Lihua and Zheng, Weijia and Liu, Xiaohuan and Liu, Mingyan},
  title = {Material Flow Behavior and Microstructure Evolution of Magnesium–Lithium Alloy Surface During Water-Cooled Friction Stir Processing},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1273},
  doi = {10.3390/met16111273}
}
Kostenlos starten →