EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Post-Weld Heat Treatment on Microstructural Evolution and Mechanical Properties of Friction Stir Welded 6061-T6 Aluminium Alloy Joints

Bin Hu, Long Li

Metals · 20.11.2026 · 16 (11) · 1274

DOI: 10.3390/met16111274 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 20.11.2026. Verfasst von Bin Hu und 1 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University-Level Quality Engineering Project, Anhui Provincial Scientific Research Project, Anhui Provincial Teaching Research Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Post-weld heat treatment (PWHT) was applied to friction stir welded (FSW) 6061-T6 aluminium alloy joints to assess regional microstructural evolution and mechanical-property recovery. The treatment consisted of solution treatment at 520 °C for 1 h, water quenching, and artificial ageing at 170 °C for 7 h. Microstructural characterisation was performed using EBSD and SEM-EDS, while mechanical properties were evaluated through microhardness measurements and tensile testing. PWHT caused grain growth in the heat-affected, thermomechanically affected, and nugget zones (NZs). In the NZs, mean grain size increased from 10.17 to 16.15 μm, the fraction classified as recrystallised increased from 84.8% to 95.8%, and the high-angle grain-boundary fraction increased from 64.1% to 70.2%; KAM decreased from 0.61° to 0.54°. NZ hardness increased from 55–63 to 106–108 HV. Ultimate tensile strength and yield strength increased from 202.3 ± 2.5 to 299.8 ± 2.0 MPa and from 149.8 ± 1.4 to 249.6 ± 1.7 MPa, respectively, while elongation decreased from 13.8 ± 0.4% to 9.5 ± 0.2%. Both conditions fractured in the NZ. These findings show that PWHT restores hardness and strength but does not change the critical fracture region.

Förderung

  • University-Level Quality Engineering Project
  • Anhui Provincial Scientific Research Project
  • Anhui Provincial Teaching Research Project
  • Talent Program of Anhui Provincial Department of Education

Zitieren

APA

Hu, B., & Li, L. (2026). Effects of Post-Weld Heat Treatment on Microstructural Evolution and Mechanical Properties of Friction Stir Welded 6061-T6 Aluminium Alloy Joints. Metals, 16(11), 1274. https://doi.org/10.3390/met16111274

Vancouver

Hu B, Li L. Effects of Post-Weld Heat Treatment on Microstructural Evolution and Mechanical Properties of Friction Stir Welded 6061-T6 Aluminium Alloy Joints. Metals. 2026;16(11):1274. doi:10.3390/met16111274

BibTeX
@article{Hu2026,
  author = {Hu, Bin and Li, Long},
  title = {Effects of Post-Weld Heat Treatment on Microstructural Evolution and Mechanical Properties of Friction Stir Welded 6061-T6 Aluminium Alloy Joints},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1274},
  doi = {10.3390/met16111274}
}
Kostenlos starten →