EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Low-Temperature, Large-Area Sinter-Bonding of Dendritic Cu Paste for Substrate-to-Base-Plate Joints

Ji-Eon Oh, Jong-Hyun Lee

Metals · 16.11.2026 · 16 (11) · 1254

DOI: 10.3390/met16111254 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 16.11.2026. Verfasst von Ji-Eon Oh und 1 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea government.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For large-area substrate-to-base-plate joints in power modules, low-temperature Cu particle sinter bonding can offer a low-cost and high-thermal-conductivity alternative to soldering. Studies on large-area, low-temperature Cu sinter bonding remain scarce. In this study, ultrafine dendritic Cu particles were synthesized via a wet-chemical route and formulated into a Cu paste using a reducing vehicle. This paste was used for large-area (12 mm × 12 mm) pressure-assisted sinter bonding at 220 °C in air. The filler exhibited a median particle diameter of 4.68 μm and a Brunauer–Emmett–Teller surface area of 9.36 m2/g, reflecting a hierarchical architecture with nanogranule-decorated branches. Large-area joints achieved shear strengths of 35.1 and 70.6 MPa (at 15 MPa for 1 and 10 min) and 59.4 MPa (at 10 MPa for 5 min), surpassing small-area counterparts (3 mm × 3 mm) and reported large-area values. This high performance stems from rapid interfacial necking and

Förderung

  • Korea government

Zitieren

APA

Oh, J., & Lee, J. (2026). Low-Temperature, Large-Area Sinter-Bonding of Dendritic Cu Paste for Substrate-to-Base-Plate Joints. Metals, 16(11), 1254. https://doi.org/10.3390/met16111254

Vancouver

Oh J, Lee J. Low-Temperature, Large-Area Sinter-Bonding of Dendritic Cu Paste for Substrate-to-Base-Plate Joints. Metals. 2026;16(11):1254. doi:10.3390/met16111254

BibTeX
@article{Oh2026,
  author = {Oh, Ji-Eon and Lee, Jong-Hyun},
  title = {Low-Temperature, Large-Area Sinter-Bonding of Dendritic Cu Paste for Substrate-to-Base-Plate Joints},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1254},
  doi = {10.3390/met16111254}
}
Kostenlos starten →