EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Novel Fe-M(Nb,Mo,Cr)-C-B Coating on AISI 4140 Steel: Microstructural, Indentation and Wear Characterization

Hasan İsmail Yavuz, Funda Gül Koç, Serkan Oktay, Onur Muratal, Eray Abakay, Darya Alontseva, Egemen Avcu, Ridvan Yamanoglu

Metals · 20.11.2026 · 16 (11) · 1276

DOI: 10.3390/met16111276 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 20.11.2026. Verfasst von Hasan İsmail Yavuz und 7 weiteren Autor:innen. Die Arbeit nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kocaeli University Scientific Research Projects Coordination Unit.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fe-based coatings containing hard secondary phases are a cost-effective alternative to Co- and Ni-based hardfacings for improving the wear resistance of steel components. A gas-atomized Fe-M(Nb,Mo,Cr)-C-B alloy was consolidated onto AISI 4140 steel by hot pressing at 1050 °C for 30 min under 50 MPa, producing a coating approximately 1 mm thick. X-ray diffraction of the powder and the consolidated coating identified an α-Fe matrix with M7(C,B)3 and M(C,B) secondary phases. The coating-substrate interface was continuous, with a narrow interdiffusion zone. Statistical nanoindentation gave 14.2 ± 4.4 GPa for the coating and 10.5 ± 1.3 GPa for the substrate. Under dry-sliding conditions, the coating exhibited a specific wear rate of (1.5 ± 0.4) × 10−6 mm3 N−1 m−1, approximately 26 times lower than that of AISI 4140 ((3.9 ± 1.9) × 10−5 mm3 N−1 m−1, 20 N, three tests per material), and a lower mean coefficient of friction (0.45 ± 0.06 vs. 0.54 ± 0.10). Worn-surface analysis indicated mild oxidative and micro-abrasive wear of the coating, in contrast to the adhesive-abrasive wear of the substrate. These results make the alloy a promising feedstock for wear-resistant powder-based coatings.

Förderung

  • Kocaeli University Scientific Research Projects Coordination Unit

Zitieren

APA

Yavuz, H. İ., Koç, F. G., Oktay, S., Muratal, O., Abakay, E., Alontseva, D., Avcu, E., & Yamanoglu, R. (2026). A Novel Fe-M(Nb,Mo,Cr)-C-B Coating on AISI 4140 Steel: Microstructural, Indentation and Wear Characterization. Metals, 16(11), 1276. https://doi.org/10.3390/met16111276

Vancouver

Yavuz Hİ, Koç FG, Oktay S, Muratal O, Abakay E, Alontseva D, et al. A Novel Fe-M(Nb,Mo,Cr)-C-B Coating on AISI 4140 Steel: Microstructural, Indentation and Wear Characterization. Metals. 2026;16(11):1276. doi:10.3390/met16111276

BibTeX
@article{Yavuz2026,
  author = {Yavuz, Hasan İsmail and Koç, Funda Gül and Oktay, Serkan and Muratal, Onur and Abakay, Eray and Alontseva, Darya and Avcu, Egemen and Yamanoglu, Ridvan},
  title = {A Novel Fe-M(Nb,Mo,Cr)-C-B Coating on AISI 4140 Steel: Microstructural, Indentation and Wear Characterization},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1276},
  doi = {10.3390/met16111276}
}
Kostenlos starten →