EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Compositionally Matched Laser Cladding for Repairing Inconel 718: Process Window, Solidification Behavior and Wear Performance

Xiguo Chen, Wenjuan Wang, Guofeng Zheng, Sheng Wang

Metals · 19.11.2026 · 16 (11) · 1271

DOI: 10.3390/met16111271 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 19.11.2026. Verfasst von Xiguo Chen und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Quzhou Science and Technology Research Project, Teacher Professional Development Project for domestic visiting scholars in universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inconel 718 is widely used for high-temperature load-bearing components, but localised wear and thermal fatigue cracking can render an entire part unserviceable. This study repairs such damage by depositing compositionally matched GA718 powder and regulating the linear energy density. Gas-atomised GA718 powder was clad onto Inconel 718 sheets via multi-pass double-layer laser cladding (18 tracks, 2 layers). The resulting layers were continuous, crack-free and metallurgically bonded to the substrate, with a γ + γ′-Ni3(Al, Ti) constitution matching that of the substrate. Laser power, scanning speed, powder feed rate and overlap rate were varied to span η = P/V = 150–250 J/mm. As η increased, the solidification structure changed from planar crystals at the interface to cellular and columnar dendrites. Rapid solidification refined the grains and raised the hardness of all claddings above 230 HV5. At 800 °C a compacted oxide glaze reduced the wear rate to 0.43 × 10−4 mm3/(N·m). Together, grain refinement, solid-solution strengthening and glaze lubrication raised the hardness to 265 HV5 at 2500 W (+49.7%) and lowered the room-temperature wear rate to 0.87 × 10−4 mm3/(N·m) (−18.7%). These results define a process window for repairing Inconel 718 with compositionally matched powder.

Förderung

  • Quzhou Science and Technology Research Project
  • Teacher Professional Development Project for domestic visiting scholars in universities

Zitieren

APA

Chen, X., Wang, W., Zheng, G., & Wang, S. (2026). Compositionally Matched Laser Cladding for Repairing Inconel 718: Process Window, Solidification Behavior and Wear Performance. Metals, 16(11), 1271. https://doi.org/10.3390/met16111271

Vancouver

Chen X, Wang W, Zheng G, Wang S. Compositionally Matched Laser Cladding for Repairing Inconel 718: Process Window, Solidification Behavior and Wear Performance. Metals. 2026;16(11):1271. doi:10.3390/met16111271

BibTeX
@article{Chen2026,
  author = {Chen, Xiguo and Wang, Wenjuan and Zheng, Guofeng and Wang, Sheng},
  title = {Compositionally Matched Laser Cladding for Repairing Inconel 718: Process Window, Solidification Behavior and Wear Performance},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1271},
  doi = {10.3390/met16111271}
}
Kostenlos starten →