Prediction and Control of Welding Deformation in Crane Booms Based on the Inherent Strain Method and Pre-Deformation Method
Metals · 13.11.2026 · 16 (11) · 1251
DOI: 10.3390/met16111251 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 13.11.2026. Verfasst von Jin-Bo Lyu und 1 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Welding deformation in crane booms presents intractable challenges in manufacturing. An innovative simulation approach, based on the inherent strain method and pre-deformation method (ISM-PDM), is proposed to control welding deformation effectively in crane booms. Furthermore, a ‘local-segment-to-global-boom’ extrapolation strategy is developed to both elucidate the evolution of deformation and identify the optimal pre-deformation magnitude. A width shrinkage of approximately 25 mm was observed in the as-welded boom segment without pre-deformation. By applying pre-deformation offsets of 10 mm and 15 mm in the width and height directions, respectively, the maximum deformation of the boom segment was suppressed by over 50%. The reliability of the proposed approach based on the ISM-PDM was validated under three conditions: a boom segment without pre-deformation, a boom segment with pre-deformation, and a full-scale boom. In all cases, the predicted deformation patterns closely matched the experimental data, with deviations not exceeding 20% of the maximum measured deformation. Furthermore, the rationality of the ‘local-segment-to-global-boom’ extrapolation strategy was validated. Together, the ISM-PDM and the local–global strategy establish a sound foundation for both welding deformation control and efficient finite element analysis of large welded box-section structures such as crane booms.
Zitieren
APA
Lyu, J., & Sui, Y. (2026). Prediction and Control of Welding Deformation in Crane Booms Based on the Inherent Strain Method and Pre-Deformation Method. Metals, 16(11), 1251. https://doi.org/10.3390/met16111251
Vancouver
Lyu J, Sui Y. Prediction and Control of Welding Deformation in Crane Booms Based on the Inherent Strain Method and Pre-Deformation Method. Metals. 2026;16(11):1251. doi:10.3390/met16111251
BibTeX
@article{Lyu2026,
author = {Lyu, Jin-Bo and Sui, Yan-Wei},
title = {Prediction and Control of Welding Deformation in Crane Booms Based on the Inherent Strain Method and Pre-Deformation Method},
journal = {Metals},
year = {2026},
volume = {16},
number = {11},
pages = {1251},
doi = {10.3390/met16111251}
}
EUVIMED