EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Al Substitution for Si on Lath Refinement, Retained Austenite Stability, and Strength–Ductility Balance in Carbide-Free Bainitic Steels

Hongliang Zhang, Zijia Qu, Dezhi Li, Jie Li, Xianming Zhao

Metals · 18.11.2026 · 16 (11) · 1264

DOI: 10.3390/met16111264 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 18.11.2026. Verfasst von Hongliang Zhang und 4 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Si and Al modify the microstructure and properties of carbide-free bainitic steels, but the effects of their relative proportions at a fixed nominal combined content require further clarification. Three steels containing a nominal total of 1.8 wt.% Si + Al were austenitized at 950 °C for 300 s and isothermally held at 350 °C for 1000 s. Dilatometry, microstructural characterization, X-ray diffraction, and tensile testing were used to investigate transformation behavior, microstructure, retained austenite (RA) stability, and mechanical properties. With increasing Al/Si ratio, the mean bainitic ferrite lath thickness decreased from 206.2 nm in A0 to 196.1 nm in A08 and 155.2 nm in A10. A10 exhibited a higher relative transformation rate during the early and intermediate stages. The estimated RA carbon content and proportion of film-like RA increased, while the cumulative fraction of RA transformed during tensile testing to fracture decreased from 65.3% to 29.2%. A08 sustained a high strain-hardening rate over a broad strain range, achieving an ultimate tensile strength of 1016.3 ± 15 MPa and an elongation after fracture of 26 ± 0.4%. A10 exhibited the highest yield strength of 741.3 ± 11 MPa. Lath refinement and changes in RA stability affected yielding and strain hardening differently, with A08 achieving a favorable strength–ductility balance.

Zitieren

APA

Zhang, H., Qu, Z., Li, D., Li, J., & Zhao, X. (2026). Effects of Al Substitution for Si on Lath Refinement, Retained Austenite Stability, and Strength–Ductility Balance in Carbide-Free Bainitic Steels. Metals, 16(11), 1264. https://doi.org/10.3390/met16111264

Vancouver

Zhang H, Qu Z, Li D, Li J, Zhao X. Effects of Al Substitution for Si on Lath Refinement, Retained Austenite Stability, and Strength–Ductility Balance in Carbide-Free Bainitic Steels. Metals. 2026;16(11):1264. doi:10.3390/met16111264

BibTeX
@article{Zhang2026,
  author = {Zhang, Hongliang and Qu, Zijia and Li, Dezhi and Li, Jie and Zhao, Xianming},
  title = {Effects of Al Substitution for Si on Lath Refinement, Retained Austenite Stability, and Strength–Ductility Balance in Carbide-Free Bainitic Steels},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1264},
  doi = {10.3390/met16111264}
}
Kostenlos starten →