Electrochemical Corrosion Behavior, Mathematical Modeling, and Multicriteria Assessment of Ti-Alloyed Martensitic Stainless Steels
Metals · 11.11.2026 · 16 (11) · 1245
DOI: 10.3390/met16111245 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 11.11.2026. Verfasst von Adrian-Emanuel Onici und 3 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Five experimental Ti-alloyed martensitic stainless steels derived from 17-4PH, with nominal Ti additions of 1–5 wt.%, were investigated to compare electrochemical corrosion behavior, Vickers microhardness, and exploratory numerical assessments. The alloys were produced by vacuum arc melting, solution-treated, and subjected to selected aging schedules. Optical microscopy, SEM–BSE/EDS characterization, image-derived descriptors, microhardness measurements, and potentiodynamic polarization tests in 3.5 wt.% NaCl were employed. The five alloy–aging conditions constituted a non-factorial design with simultaneous compositional and processing variations. P5–H900 exhibited the lowest reported corrosion current density (0.419 µA cm−2) and highest polarization resistance (61.67 kΩ cm2), together with a mean microhardness of 570.6 HV0.2. Its corrosion current density was approximately 93.3-fold lower than that of P1–H900. Stern–Geary recalculation demonstrated internal numerical consistency, whereas leave-one-out cross-validation revealed substantial regression instability. Multicriteria rankings depended on criterion selection, normalization, and weighting assumptions. The absence of independent electrochemical replication and a processing-matched unmodified reference limits causal interpretation and statistical validation. These results support condition-specific comparisons and identify candidates for further controlled investigation rather than establishing an isolated titanium effect or validated predictive optimization.
Zitieren
APA
Onici, A., Voiculescu, I., Ștefănoiu, R., & Geantă, V. (2026). Electrochemical Corrosion Behavior, Mathematical Modeling, and Multicriteria Assessment of Ti-Alloyed Martensitic Stainless Steels. Metals, 16(11), 1245. https://doi.org/10.3390/met16111245
Vancouver
Onici A, Voiculescu I, Ștefănoiu R, Geantă V. Electrochemical Corrosion Behavior, Mathematical Modeling, and Multicriteria Assessment of Ti-Alloyed Martensitic Stainless Steels. Metals. 2026;16(11):1245. doi:10.3390/met16111245
BibTeX
@article{Onici2026,
author = {Onici, Adrian-Emanuel and Voiculescu, Ionelia and Ștefănoiu, Radu and Geantă, Victor},
title = {Electrochemical Corrosion Behavior, Mathematical Modeling, and Multicriteria Assessment of Ti-Alloyed Martensitic Stainless Steels},
journal = {Metals},
year = {2026},
volume = {16},
number = {11},
pages = {1245},
doi = {10.3390/met16111245}
}
EUVIMED