Influence of Solution Temperature and Cooling Route on High-Temperature Tensile Deformation and Fracture of a Novel Fourth-Generation Powder Metallurgy Ni-Based Superalloy at 830 °C
Metals · 12.11.2026 · 16 (11) · 1247
DOI: 10.3390/met16111247 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 12.11.2026. Verfasst von Yifan Ma und 4 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key R&D Program of China.
Abstract (Originalsprache)
Fourth-generation powder metallurgy (PM) Ni-based superalloys are being developed for advanced turbine disks requiring high strength, damage tolerance, and elevated service temperatures. Rational heat-treatment design is required to reconcile high-temperature strength and tensile ductility to satisfy the ever-increasing service demands of aero-engines. This work investigates the influences of solution temperature and cooling route on 830 °C tensile behavior of a novel fourth-generation PM Ni-based superalloy under three heat-treatment schedules followed by identical aging. The results show that the 1190 °C/OQ condition achieves the highest mean elongation of 17.00 ± 0.00% and a UTS of 1093.2 ± 2.0 MPa. Increasing the solution temperature to 1210 °C under OQ raises the mean UTS to 1194.7 ± 7.3 MPa, while the mean elongation decreases to 6.67 ± 2.02%. The 1190 °C/AC condition exhibits a mean elongation of 3.83 ± 0.29% and a UTS of 1066.3 ± 7.3 MPa. EBSD and TEM reveal distinct deformation modes: grain-boundary-localized damage for 1190 °C/AC, broadly distributed intragranular plasticity for 1190 °C/OQ, and band-type strain localization for 1210 °C/OQ. The differences in tensile ductility are associated with the spatial distribution of plastic strain and grain-boundary damage resistance; neither average γ′ size nor the slip-compatibility factor m′ alone reproduces the measured ductility ranking. These findings provide a mechanistic basis for heat-treatment control of this novel fourth-generation PM superalloy.
Förderung
- National Natural Science Foundation of China
- National Key R&D Program of China
Zitieren
APA
Ma, Y., Xu, H., Wang, E., Wang, J., & Hou, X. (2026). Influence of Solution Temperature and Cooling Route on High-Temperature Tensile Deformation and Fracture of a Novel Fourth-Generation Powder Metallurgy Ni-Based Superalloy at 830 °C. Metals, 16(11), 1247. https://doi.org/10.3390/met16111247
Vancouver
Ma Y, Xu H, Wang E, Wang J, Hou X. Influence of Solution Temperature and Cooling Route on High-Temperature Tensile Deformation and Fracture of a Novel Fourth-Generation Powder Metallurgy Ni-Based Superalloy at 830 °C. Metals. 2026;16(11):1247. doi:10.3390/met16111247
BibTeX
@article{Ma2026,
author = {Ma, Yifan and Xu, Hui and Wang, Enhui and Wang, Jinhui and Hou, Xinmei},
title = {Influence of Solution Temperature and Cooling Route on High-Temperature Tensile Deformation and Fracture of a Novel Fourth-Generation Powder Metallurgy Ni-Based Superalloy at 830 °C},
journal = {Metals},
year = {2026},
volume = {16},
number = {11},
pages = {1247},
doi = {10.3390/met16111247}
}
EUVIMED