Surface Sulfur Conversion of Chalcopyrite for Efficient Kerosene Desorption and Cu–Mo Flotation Separation
Metals · 12.11.2026 · 16 (11) · 1248
DOI: 10.3390/met16111248 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 12.11.2026. Verfasst von Wenxuan Xu und 9 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deep Earth Probe and Mineral Resources Exploration-National Science and Technology Major Project, National Natural Science Foundation of China, Key Program of the State Key Laboratory of Advanced Metallurgy for Non-ferrous Metals.
Abstract (Originalsprache)
Porphyry copper–molybdenum deposits are major sources of both metals, yet efficient separation of chalcopyrite and molybdenite remains challenging, especially in the presence of pre-adsorbed collectors. This study demonstrates a surface sulfur conversion strategy using sodium metabisulfite (SMBS) to remove pre-adsorbed kerosene and restore selective depression of chalcopyrite. Micro-flotation tests show that pre-adsorbed kerosene severely impairs the depressive effect of sodium thioglycolate (STG) on chalcopyrite, resulting in poor separation performance. SMBS treatment, in combination with STG, achieves a Cu–Mo recovery differential exceeding 90 percentage points, while molybdenite floatability remains virtually unaffected. Mechanistic investigations via contact angle measurements, FT-IR, zeta potential analysis, XPS, and electrochemical characterization reveal that SMBS treatment results in a decrease in hydrophobic disulfide species and an increase in hydrophilic sulfate species on the chalcopyrite surface. This surface transformation disrupts the pre-adsorbed kerosene film, enhances chalcopyrite hydrophilicity, and facilitates subsequent STG adsorption for sustained depression. These findings establish surface sulfur conversion as a mechanistic platform for non-polar collector desorption and offer a chemically driven, environmentally sustainable approach to selective Cu–Mo flotation separation.
Förderung
- Deep Earth Probe and Mineral Resources Exploration-National Science and Technology Major Project
- National Natural Science Foundation of China
- Key Program of the State Key Laboratory of Advanced Metallurgy for Non-ferrous Metals
Zitieren
APA
Xu, W., He, S., Wang, P., Jiang, F., Tang, H., Sun, W., Che, X., Liao, J., Lin, J., & Kang, J. (2026). Surface Sulfur Conversion of Chalcopyrite for Efficient Kerosene Desorption and Cu–Mo Flotation Separation. Metals, 16(11), 1248. https://doi.org/10.3390/met16111248
Vancouver
Xu W, He S, Wang P, Jiang F, Tang H, Sun W, et al. Surface Sulfur Conversion of Chalcopyrite for Efficient Kerosene Desorption and Cu–Mo Flotation Separation. Metals. 2026;16(11):1248. doi:10.3390/met16111248
BibTeX
@article{Xu2026,
author = {Xu, Wenxuan and He, Shuai and Wang, Pengyuan and Jiang, Feng and Tang, Honghu and Sun, Wei and Che, Xian and Liao, Jinling and Lin, Julong and Kang, Jianhua},
title = {Surface Sulfur Conversion of Chalcopyrite for Efficient Kerosene Desorption and Cu–Mo Flotation Separation},
journal = {Metals},
year = {2026},
volume = {16},
number = {11},
pages = {1248},
doi = {10.3390/met16111248}
}
EUVIMED