Molten Bath Flow Characteristics and Metallurgical Performance of Bottom Injection in a 300 t Basic Oxygen Furnace
Metals · 11.11.2026 · 16 (11) · 1239
DOI: 10.3390/met16111239 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 11.11.2026. Verfasst von Zhiyong Liu und 7 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education of China, Jing–Jin–Ji Regional Integrated Environmental Improvement-National Science and Technology, National Natural Science Foundation of China.
Abstract (Originalsprache)
Efficient lime utilization and dephosphorization in basic oxygen furnace (BOF) steelmaking require a bottom-blowing regime that disperses injected lime powder without forming a penetrating gas column. This study optimized the bottom-blowing flow rate for O2–CO2–CaO powder injection in a 300 t BOF by combining a 1:7 water-model experiment, three-phase volume-of-fluid computational fluid dynamics (CFD), and industrial trials. The industrial process used an O2–CO2 carrier-gas mixture with a volumetric ratio of 50:50 to convey CaO powder. The water model showed that bath homogenization time first decreased and then increased with flow rate, reaching a minimum of 35.90 s at 1350 Nm3/h. The simulations predicted dispersed bubble flow at 1200–1350 Nm3/h, a transitional regime at 1450 Nm3/h, and a fully developed gas column at 1500 Nm3/h. At 1350 Nm3/h, the gas–liquid interfacial area reached 5.624 m2 and the low-velocity-zone fraction decreased to 0.04%. Industrial implementation reduced lime consumption from 9.28 to 7.57kg/t, lowered endpoint phosphorus from 0.037% to 0.029%, increased the lime dissolution ratio from 0.52 to 0.68, and decreased total iron in the endpoint slag from 24.7% to 22.9%. By correlating flue gas behavior with hydrodynamic parameters from CFD simulations and industrial metallurgical performance, this study confirms that the bottom-blown gas process is favorable under the investigated converter conditions.
Förderung
- Ministry of Education of China
- Jing–Jin–Ji Regional Integrated Environmental Improvement-National Science and Technology
- National Natural Science Foundation of China
- National Key R&D Program of China
Zitieren
APA
Liu, Z., Dong, K., Wang, C., Ma, Z., Zhao, R., Tong, B., Liu, F., & Wei, G. (2026). Molten Bath Flow Characteristics and Metallurgical Performance of Bottom Injection in a 300 t Basic Oxygen Furnace. Metals, 16(11), 1239. https://doi.org/10.3390/met16111239
Vancouver
Liu Z, Dong K, Wang C, Ma Z, Zhao R, Tong B, et al. Molten Bath Flow Characteristics and Metallurgical Performance of Bottom Injection in a 300 t Basic Oxygen Furnace. Metals. 2026;16(11):1239. doi:10.3390/met16111239
BibTeX
@article{Liu2026,
author = {Liu, Zhiyong and Dong, Kai and Wang, Chunyang and Ma, Zhonglan and Zhao, Ruimin and Tong, Bin and Liu, Fuhai and Wei, Guangsheng},
title = {Molten Bath Flow Characteristics and Metallurgical Performance of Bottom Injection in a 300 t Basic Oxygen Furnace},
journal = {Metals},
year = {2026},
volume = {16},
number = {11},
pages = {1239},
doi = {10.3390/met16111239}
}
EUVIMED