EUVIMED · CrossrefJournal
Archives of Foundry Engineering
ISSN 2299-2944 · Polish Academy of Sciences Chancellery
Latest articles
The Complex Computational System for Simulating the Carbonitride Precipitation Process and Precipitate Microstructure in Microalloyed Steels
Cooling Rate and Gradient by Fe- and Mn-Rich Phases Precipitation in AlCuSi Alloys
Effect of Titanium Addition on Microstructure and Properties of Nitrogen-Alloyed High Chromium Cast Iron
Analysis of the Correlation Between Ferrous Scrap Quality and Metallic Yield in EAF Steelmaking
The Influence of the Working Layer Thickness on the Quality of the Joint in Layered Castings
Industrial Potential of Additively Manufactured H13 Steel Components: A Service Life Study
Hydrometallurgical Processing of Aluminium Drosses Using Alkaline and Acidic Leaching Media
Effect of Tungsten Alloying and T7 Heat Treatment on the Corrosion Behavior of AlSi5Cu2Mg Alloy: Electrochemical and Long-term Immersion Study
Study the Thermodynamic Behaviour of Inclusions in High Heat Input Welding Steel
Investigating the Effect of Diameter-to-Height Ratio of the Starter Block on the Microstructure and Crystallographic Orientation of CMSX-4 Single Crystal
Thermodynamic Analysis of MnS Inclusion Precipitation in Non-Quenched and Tempered 46MnVS5 Steel
Nanoindentation Studies of Al2O3-TiO2 Coating with NiAl Interlayer Deposited on AlSi7Mg Alloy Casting
Material Properties of AISI 307 Austenitic Stainless Steel Weld Overlay Plasma-cladded onto a Ductile Iron Casting
Nanoindentation Testing of the Microstructure of AZ91 Alloy Castings with a WCCoCr Coating
Microstructure of the EN-GJL-150 Cast Iron Matrix Composite with SiC and Al₂O₃ Particles
The Influence of Manufacturing Technology on the Structure and Properties of a Composite Based on EN AB-43000 Alloy Reinforced with SiC Particles
Selective Microwave Sintering of EPS Patterns for Lost Foam Casting
Analysis of the Phase Composition and Microstructure of Slag from a Semi-Steel Converter
Study on Decarburization and Dehydrogenation of Molten Steel under CO₂/Ar Mixed Blowing
Effect of Fuel Type on Flow-Thermal Field Evolution and Preheating Performance of Scrap in Molten Iron Ladle
Bootstrapping Regression Support Tool for Energy Management in Induction Melting Processes: a Multi-Plant Case Study
Foundry Dust - Alternative Additive for Green Sand Mixtures
Tribological Properties of EN-GJL-150 grey Cast Iron Composites Produced Using Porous SiC and Al₂O₃ Inserts
Thermal Properties of the Foundry Sand Mould Material Bonded with Resol Type Resin
Impact of the Moulding Parameters on Flowability of Bentonite-Bonded-Green Sand Mould
Optimization of Rotary Degassing Parameters to Improve Melt Cleanliness and Mechanical Properties in A356 Aluminum Alloy
The Influence of Casting Technology on the Mechanical Properties and Microstructure of the WE43 Alloy for Medical Applications
The Effect of Minor Additions of Be on the Microstructure of AlSi5Cu2Mg Alloys
Does an Increase in Iron Content Affect the Shrinkage Porosity of Secondary Al-Si Alloys?
Influence of Molding Mixture Composition on TOC and BTEX Emissions
EUVIMED