Material Properties of AISI 307 Austenitic Stainless Steel Weld Overlay Plasma-cladded onto a Ductile Iron Casting
Archives of Foundry Engineering · 21.09.2026 · 26 (3) · 127-131
DOI: 10.24425/afe.2026.158026 ↗Kurz gefasst
Fachartikel in der Zeitschrift Archives of Foundry Engineering, online erschienen am 21.09.2026. Verfasst von M. Jacek-Burek und 1 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The paper presents the results of material properties investigations of a weld overlay made of AISI 307 austenitic stainless steel, intended for the valve seat of sealing and draining nodes of water supply valves. A CuZn39Pb2 alloy, also used for the valve seats of these valves, served as the reference material. The AISI 307 steel weld overlay was fabricated by plasma cladding on a ductile iron substrate. The material properties investigations were carried out using the nanoindentation method. The following values were determined: Vickers hardness HV, indentation hardness HIT, indentation elastic modulus EIT, reduced elastic modulus E*, relative change in indentation depth CIT, elastic deformation work Welast., plastic deformation work Wplast., total mechanical work Wtotal., and the elastic component of indentation work ηIT. The obtained results showed that the AISI 307 steel weld overlay is characterized by significantly better material properties values compared to the CuZn39Pb2 alloy. Taking into account the operating conditions of water supply valves, primarily corrosion resistance, abrasive wear resistance, and cavitation wear resistance, the obtained material properties results indicate a greater application potential for the AISI 307 steel weld overlay in the construction of sealing and draining nodes of water supply valves compared to the commonly used copper alloy.
Zitieren
APA
Jacek-Burek, M., & Mróz, M. (2026). Material Properties of AISI 307 Austenitic Stainless Steel Weld Overlay Plasma-cladded onto a Ductile Iron Casting. Archives of Foundry Engineering, 26(3), 127-131. https://doi.org/10.24425/afe.2026.158026
Vancouver
Jacek-Burek M, Mróz M. Material Properties of AISI 307 Austenitic Stainless Steel Weld Overlay Plasma-cladded onto a Ductile Iron Casting. Archives of Foundry Engineering. 2026;26(3):127-131. doi:10.24425/afe.2026.158026
BibTeX
@article{JacekBurek2026,
author = {Jacek-Burek, M. and Mróz, M.},
title = {Material Properties of AISI 307 Austenitic Stainless Steel Weld Overlay Plasma-cladded onto a Ductile Iron Casting},
journal = {Archives of Foundry Engineering},
year = {2026},
volume = {26},
number = {3},
pages = {127--131},
doi = {10.24425/afe.2026.158026}
}
EUVIMED