Selective Microwave Sintering of EPS Patterns for Lost Foam Casting
Archives of Foundry Engineering · 02.09.2026 · 26 (3) · 17-25
DOI: 10.24425/afe.2026.158014 ↗Kurz gefasst
Fachartikel in der Zeitschrift Archives of Foundry Engineering, online erschienen am 02.09.2026. Verfasst von M. Topola und 3 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates an innovative approach to sintering polystyrene via microwave radiation, aiming to transform manufacturing techniques in the lost-foam casting industry. The primary objective was to develop a laboratory-scale method for the microwave-based sintering of polystyrene patterns. Two types of polystyrene were examined: EPS Styropor P 426 Ccycled and EPS K-950w/S4311. The sintering process involved pre-expansion of the material with hot air, followed by placement in a 3D-printed mould, application of a water film as the microwave-absorbing medium (delivered by atomiser both onto the empty mould cavity and onto the bed of pre-expanded beads), and exposure to 2.45 GHz microwave radiation. The key process parameters were the dose of water, the volume of pre-expanded polystyrene, and the duration of microwave sintering. The results showed that longer sintering times enhanced the flexural strength of the patterns: the highest flexural strength of 127.84 kPa was obtained for a flexural specimen produced with 8 ml of water in 20 cm³ of pre-expanded EPS K-950w/S4311 and a microwave exposure time of 480 s (group mean 125.63 ± 2.99 kPa, n = 3). EPS K-950w/S4311 was more amenable to microwave sintering than Styropor P 426 Ccycled. The current findings establish a robust laboratory-scale framework; subsequent research will focus on scaling these parameters for industrial high-volume production and on broadening the statistical sample base. Overall, the proposed microwave sintering technology shows significant promise for the small-batch and prototype production of casting patterns, offering a more environmentally friendly and cost-effective alternative to conventional autoclave-based steam-chest moulding.
Zitieren
APA
Topola, M., Jastrzębski, K., Rapiejko, C., & Just, P. (2026). Selective Microwave Sintering of EPS Patterns for Lost Foam Casting. Archives of Foundry Engineering, 26(3), 17-25. https://doi.org/10.24425/afe.2026.158014
Vancouver
Topola M, Jastrzębski K, Rapiejko C, Just P. Selective Microwave Sintering of EPS Patterns for Lost Foam Casting. Archives of Foundry Engineering. 2026;26(3):17-25. doi:10.24425/afe.2026.158014
BibTeX
@article{Topola2026,
author = {Topola, M. and Jastrzębski, K. and Rapiejko, C. and Just, P.},
title = {Selective Microwave Sintering of EPS Patterns for Lost Foam Casting},
journal = {Archives of Foundry Engineering},
year = {2026},
volume = {26},
number = {3},
pages = {17--25},
doi = {10.24425/afe.2026.158014}
}
EUVIMED