EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of the Phase Composition and Microstructure of Slag from a Semi-Steel Converter

Li Chenxiao, Wei Yongcong, Zhao Peng, Zhang Kaixuan, Gao Qianqian, Feng Zikang

Archives of Foundry Engineering · 02.09.2026 · 26 (3) · 26-33

DOI: 10.24425/afe.2026.158015 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Archives of Foundry Engineering, online erschienen am 02.09.2026. Verfasst von Li Chenxiao und 5 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To clarify the phase composition, microstructural characteristics, and phosphorus retention mechanisms of semi-steel converter slag, this study employed characterization techniques such as XRD, SEM-EDS, FTIR, and Raman spectroscopy to systematically compare the mineral composition, phosphorus retention patterns, and microstructure of semi-steel converter slag with those of single-slag converter slag. The results show that the main mineral phases in both types of slag are C2F, C2S, and the RO phase; in single-slag converter slag, phosphorus primarily exists as n-dicalcium silicate-tricalcium phosphate solid solutions, with a small amount tending to be fixed in the glass phase and other phosphates; in semi-steel converter slag, phosphorus is enriched in the form of nC2S-C3P solid solutions and C3P, with a small amount present in the glass phase and phosphorus-containing solid solutions; Both types of slag are composed of phosphates, silicates, and iron-aluminum coordination structures, with relatively low siloxane polymerization degrees, and P-O-P and P-O-Si are not major structural units. However, there are significant differences in the iron coordination environment: in semi-steel converter slag, iron primarily exists as FeO4 tetrahedra and FeO6 octahedra, whereas in single-slag converter slag, iron tends to form FeO4 tetrahedra; furthermore, the silicon and phosphorus group content and network polymerization degree in single-slag converter slag are significantly higher than those in semi-steel converter slag. This study provides a theoretical basis for the resource utilization of converter slag and the optimization of smelting process parameters.

Zitieren

APA

Chenxiao, L., Yongcong, W., Peng, Z., Kaixuan, Z., Qianqian, G., & Zikang, F. (2026). Analysis of the Phase Composition and Microstructure of Slag from a Semi-Steel Converter. Archives of Foundry Engineering, 26(3), 26-33. https://doi.org/10.24425/afe.2026.158015

Vancouver

Chenxiao L, Yongcong W, Peng Z, Kaixuan Z, Qianqian G, Zikang F. Analysis of the Phase Composition and Microstructure of Slag from a Semi-Steel Converter. Archives of Foundry Engineering. 2026;26(3):26-33. doi:10.24425/afe.2026.158015

BibTeX
@article{Chenxiao2026,
  author = {Chenxiao, Li and Yongcong, Wei and Peng, Zhao and Kaixuan, Zhang and Qianqian, Gao and Zikang, Feng},
  title = {Analysis of the Phase Composition and Microstructure of Slag from a Semi-Steel Converter},
  journal = {Archives of Foundry Engineering},
  year = {2026},
  volume = {26},
  number = {3},
  pages = {26--33},
  doi = {10.24425/afe.2026.158015}
}
Kostenlos starten →