EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure of the EN-GJL-150 Cast Iron Matrix Composite with SiC and Al₂O₃ Particles

J. Piątkowski, M. Wojciechowski, J. Fusiarz

Archives of Foundry Engineering · 02.09.2026 · 26 (3) · 5-10

DOI: 10.24425/afe.2026.158012 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Archives of Foundry Engineering, online erschienen am 02.09.2026. Verfasst von J. Piątkowski und 2 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper presents an evaluation of the microstructure of a newly developed cast iron–ceramic composite intended for modern braking systems, such as brake discs or brake drums. The composite matrix is grey cast iron with flake graphite (EN-GJL-150), commonly used for brake disc production. The reinforcing phase is a porous ceramic composed of 70 wt.% SiC and 30 wt.% Al₂O₃, intended to enhance the crystallization process and facilitate graphite nucleation in the pearlitic matrix. Microstructural investigations were carried out using digital optical microscopy and scanning electron microscopy (SEM). The results show that reinforcement of the matrix with ceramic particles significantly alters the microstructure of the investigated cast iron. Microstructural analysis of the EN-GJL-150 + SiC + Al₂O₃ composite revealed a previously unreported phenomenon of nucleation occurring at the cast iron–ceramic phase boundary. Consequently, the general assumptions of Riposan’s theory concerning the role of oxide micro-inclusions and complex manganese sulphides of the (Mn,X) S type in the nucleation and crystallization of graphite precipitates were confirmed. At the same time, it was found that in the case of in situ cast iron–ceramic composites (GJL-150 + SiC + Al₂O₃), this theory should also account for the beneficial role of ceramic particles in promoting a uniform distribution of type A graphite flakes, which nucleate on the surfaces of these particles within the interfacial transition zone. Thus, the nucleation role of oxide micro-inclusions (the first stage of Riposan’s theory) could be assumed by SiC and Al₂O₃ particles (Fig. 6), which provide substrates for the heterogeneous nucleation of (Mn, X) S sulphides. The microstructure of such a composite may have a beneficial effect by reducing the wear of friction components in braking systems and decreasing environmental dust emissions from wear products, as required by new European Union regulations, e.g., the EURO 7 standard.

Zitieren

APA

Piątkowski, J., Wojciechowski, M., & Fusiarz, J. (2026). Microstructure of the EN-GJL-150 Cast Iron Matrix Composite with SiC and Al₂O₃ Particles. Archives of Foundry Engineering, 26(3), 5-10. https://doi.org/10.24425/afe.2026.158012

Vancouver

Piątkowski J, Wojciechowski M, Fusiarz J. Microstructure of the EN-GJL-150 Cast Iron Matrix Composite with SiC and Al₂O₃ Particles. Archives of Foundry Engineering. 2026;26(3):5-10. doi:10.24425/afe.2026.158012

BibTeX
@article{Pitkowski2026,
  author = {Piątkowski, J. and Wojciechowski, M. and Fusiarz, J.},
  title = {Microstructure of the EN-GJL-150 Cast Iron Matrix Composite with SiC and Al₂O₃ Particles},
  journal = {Archives of Foundry Engineering},
  year = {2026},
  volume = {26},
  number = {3},
  pages = {5--10},
  doi = {10.24425/afe.2026.158012}
}
Kostenlos starten →