EUVIMED · CrossrefJournal
Fracture and Structural Integrity
ISSN 1971-8993 · Gruppo Italiano Frattura
Latest articles
Effect of core architecture on flexural strength and failure behavior of additively manufactured composite sandwich panels
Nonlinear dynamics of thermal shock in graphite
Corrosion Morphology and Penetration in High-Strength Structural Steels Characterized by X-Ray Tomography and Mass-Loss Measurements
Machine learning–based wear prediction of carbon fiber–reinforced polypropylene composites using an L25 orthogonal array
Machine learning–based wear prediction of carbon fiber–reinforced polypropylene composites using an L25 orthogonal array
Heat treatment optimization and Chromium Nitride precipitation control in heavy-section Superduplex Stainless Steel forgings
Modeling the PSN mechanism of recrystallization nuclei formation in Inconel 718
The effect of external service-induced defects on the mechanical properties of fibreglass-reinforced plastic under compression
Effects of seawater corrosion, notch timing, and test temperature on the impact toughness of AISI 1008 marine chain steel
Investigating the effects of steel fibers and notch depth on the fracture behavior of reinforced concrete (RC) beams using both matrix-cracked and through-thickness cracked approaches
Comparative study on dry wear and tribocorrosion behavior of boronized martensitic stainless steels
Optimal shape determination of shear specimens using Machine Learning
Influence of impact energy on residual stresses values inherent in damaged area of composite plate
Effect of layer orientation and infill density on reliability and lifetime of FDM-printed conductive composites under tensile loading
Fatigue damage assessment for Sine-on-Random: a comparative analysis of the predictive capability and application limits of spectral methods
Mechanical and Fracture Response of Epoxy Nanocomposites Reinforced with Low Concentration Graphene and Graphene–SiO₂ Hybrids
Experimental and numerical investigation of residual stresses in butt-weld joint made of cast iron and mild steel
Heat treatment of steel using Carboxymethyl Cellulose (CMC) as a green quenching medium: effect of concentration on microstructure evolution and wear resistance
Mechanical, tribological and fractography analysis of structural grade Al7075/n-TiC composites and optimization of wire EDM parameters through Taguchi method
Fatigue behavior of 17-4 PH parts produced by Material Extrusion Additive Manufacturing: A study on thickness and notch effects
Influence mechanism of defects in aluminum alloy friction stir welding on fatigue life
Investigating the fracture and deformation behaviour of pre-strained Grade 91 steel under small punch loading
Parametric analysis of carbon nanofiber effects on mechanical properties and abrasion resistance of GF/PPS hybrid composites
Effect of ultrasonic welding conditions and energy director thickness on structure and properties of lap-joints of PEEK-based composites reinforced with short carbon fibers
Study of the influence of recycling aluminum on the cyclic material behavior for chill cast AlSi7Mg0.3
Modeling subgrain structure evolution during heat treatment
Stress intensity factors for through clad and underclad defects in a WWER type reactor pressure vessel in pressurised thermal shock analysis
Preparation and enhanced mechanical properties of epoxy resin modified with pyrolysis bio-oil
Mechanical characterization and crack propagation in Additively Manufactured Polymers using Digital Image Correlation: a review
Phenomenological models of residual mechanical properties of polymer composites under fatigue loading: review, analysis of descriptive ability and classification
EUVIMED