Investigating the effects of steel fibers and notch depth on the fracture behavior of reinforced concrete (RC) beams using both matrix-cracked and through-thickness cracked approaches
Fracture and Structural Integrity · 15.08.2026 · 20 (78) · 168-185
DOI: 10.3221/igf-esis.78.10 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fracture and Structural Integrity, online erschienen am 15.08.2026. Verfasst von Manar Adel und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Steel fibers are commonly used to compensate for the tensile weakness of concrete. However, the interaction of steel fibers with conventional reinforcing bars after a crack has been formed is poorly understood. Most fracture studies use a cut through the thickness of the material that cuts through any fiber in its path, whereas a real crack would maintain the bridging action. In this study, the true mode I fracture toughness (KIC) of steel-fiber-reinforced concrete beams with longitudinal steel bars is determined using a matrix-crack (MC) approach where short fibers are not broken through a natural pre-crack, and compared with companion beams prepared with a conventional through-thickness crack (TTC). Reinforced concrete (RC), normal strength concrete (NC), and fiber-reinforced concrete (FRC) beams with a steel fiber volume fraction of 1.0%, two ratios of notch depth to beam depth (a/d=0.25 and 0.5), and two reinforcement layouts were tested under four-point bending. Incorporation of steel fibers delayed crack propagation and improved ductility, increasing the ultimate load-carrying capacity by up to 50% and the modulus of toughness by nearly 94% relative to fiber-free beams. All cases showed higher first-cracking loads and better post-cracking load maintenance for MC specimens than for TTC specimens, confirming that the MC approach provides a more realistic representation of fiber bridging. KIC increased with a/d in plain reinforced beams, due to the growing moment arm of the steel closing force, but decreased with a/d in fiber-reinforced beams, indicating that fiber-bridging efficiency weakens as the crack deepens. The results support the MC method as a more reliable approach for assessing the intrinsic fracture toughness of fiber-reinforced RC members.
Zitieren
APA
Adel, M., Ahmad, S., & Elakhras, A. A. (2026). Investigating the effects of steel fibers and notch depth on the fracture behavior of reinforced concrete (RC) beams using both matrix-cracked and through-thickness cracked approaches. Fracture and Structural Integrity, 20(78), 168-185. https://doi.org/10.3221/igf-esis.78.10
Vancouver
Adel M, Ahmad S, Elakhras AA. Investigating the effects of steel fibers and notch depth on the fracture behavior of reinforced concrete (RC) beams using both matrix-cracked and through-thickness cracked approaches. Fracture and Structural Integrity. 2026;20(78):168-185. doi:10.3221/igf-esis.78.10
BibTeX
@article{Adel2026,
author = {Adel, Manar and Ahmad, Seleem and Elakhras, Ahmed A.},
title = {Investigating the effects of steel fibers and notch depth on the fracture behavior of reinforced concrete (RC) beams using both matrix-cracked and through-thickness cracked approaches},
journal = {Fracture and Structural Integrity},
year = {2026},
volume = {20},
number = {78},
pages = {168--185},
doi = {10.3221/igf-esis.78.10}
}
EUVIMED