Effect of layer orientation and infill density on reliability and lifetime of FDM-printed conductive composites under tensile loading
Fracture and Structural Integrity · 25.07.2026 · 20 (78) · 74-95
DOI: 10.3221/igf-esis.78.05 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fracture and Structural Integrity, online erschienen am 25.07.2026. Verfasst von Nassima Naboulsi und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Conductive composites have attracted growing interest in recent years in the field of additive manufacturing, especially for functional and structural applications. Nevertheless, their mechanical behavior and durability remain highly influenced by 3D printing methods and parameters. This paper investigates the combined effect of layer orientation and infill density on the mechanical damage and reliability of PLA-CB conductive composites manufactured by filament deposition modeling (FDM) technology. Tensile tests were performed on specimens printed with different layer orientations (0°, 45° and 90°) and infill densities (20%, 40%, 60%, 80% and 100%) to analyze the evolution of damage and the dispersion of mechanical properties. Analysis of damage evolution was used to model failure probability, assess material reliability, and predict service life based on 3D printing parameters. The results indicate that infill density significantly influences mechanical strength and performance stability, while layer orientation also plays a key role in the failure mechanism. The 0° orientation (parallel to the tensile direction) offered the best mechanical performance. At 45°, the results show intermediate behavior between stiffness and flexibility due to the distribution of shear stresses between layers. However, samples printed at 90° show much lower strength, dominated by delamination between layers. This study thus proposes a useful predictive framework for optimizing the printing parameters of PLA-CB conductive composites and contributes to a better understanding of their behavior in service for applications requiring reliable and durable mechanical performance.
Zitieren
APA
Naboulsi, N., Karmil, F. Z., Douiri, N., Hmazi, F. A., Taoufik, H., & Majid, F. (2026). Effect of layer orientation and infill density on reliability and lifetime of FDM-printed conductive composites under tensile loading. Fracture and Structural Integrity, 20(78), 74-95. https://doi.org/10.3221/igf-esis.78.05
Vancouver
Naboulsi N, Karmil FZ, Douiri N, Hmazi FA, Taoufik H, Majid F. Effect of layer orientation and infill density on reliability and lifetime of FDM-printed conductive composites under tensile loading. Fracture and Structural Integrity. 2026;20(78):74-95. doi:10.3221/igf-esis.78.05
BibTeX
@article{Naboulsi2026,
author = {Naboulsi, Nassima and Karmil, Fatima Zahra and Douiri, Narjisse and Hmazi, Fouad Ait and Taoufik, Hachimi and Majid, Fatima},
title = {Effect of layer orientation and infill density on reliability and lifetime of FDM-printed conductive composites under tensile loading},
journal = {Fracture and Structural Integrity},
year = {2026},
volume = {20},
number = {78},
pages = {74--95},
doi = {10.3221/igf-esis.78.05}
}
EUVIMED