EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Corrosion Morphology and Penetration in High-Strength Structural Steels Characterized by X-Ray Tomography and Mass-Loss Measurements

Stanislav Seitl, Mohammad Sami AL Khazali, Ivana Kumpová, Pavel Doubek, Lucie Malikova, Jan Klusak

Fracture and Structural Integrity · 10.11.2026 · 21 (79) · 218-231

DOI: 10.3221/igf-esis.79.12 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fracture and Structural Integrity, online erschienen am 10.11.2026. Verfasst von Stanislav Seitl und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mass-loss measurements provide a global measure of corrosion damage but do not capture extreme localized penetration. This study compares CT-derived maximum localized penetration with mass-loss-derived equivalent average penetration for S460, S690, and S960 structural steels subjected to three controlled 5% NaCl exposure regimes. X-ray computed tomography was performed on one specimen per steel-grade–exposure combination, while gravimetric measurements were obtained from four comparable specimens per condition. The novelty lies in directly comparing localized CT descriptors with replicated global mass-loss data under common exposure conditions. Maximum localized penetration ranged from 97.5 to 724.2 µm, whereas equivalent average penetration ranged from 12.9 to 46.1 µm. The results show that CT and gravimetric measurements describe different aspects of corrosion damage and should not be used interchangeably. A corrosion localization index was used only as a supplementary maximum-to-average penetration ratio. Combining both descriptors may improve durability assessment where average mass loss underrepresents severe localized penetration.

Zitieren

APA

Seitl, S., Khazali, M. S. A., Kumpová, I., Doubek, P., Malikova, L., & Klusak, J. (2026). Corrosion Morphology and Penetration in High-Strength Structural Steels Characterized by X-Ray Tomography and Mass-Loss Measurements. Fracture and Structural Integrity, 21(79), 218-231. https://doi.org/10.3221/igf-esis.79.12

Vancouver

Seitl S, Khazali MSA, Kumpová I, Doubek P, Malikova L, Klusak J. Corrosion Morphology and Penetration in High-Strength Structural Steels Characterized by X-Ray Tomography and Mass-Loss Measurements. Fracture and Structural Integrity. 2026;21(79):218-231. doi:10.3221/igf-esis.79.12

BibTeX
@article{Seitl2026,
  author = {Seitl, Stanislav and Khazali, Mohammad Sami AL and Kumpová, Ivana and Doubek, Pavel and Malikova, Lucie and Klusak, Jan},
  title = {Corrosion Morphology and Penetration in High-Strength Structural Steels Characterized by X-Ray Tomography and Mass-Loss Measurements},
  journal = {Fracture and Structural Integrity},
  year = {2026},
  volume = {21},
  number = {79},
  pages = {218--231},
  doi = {10.3221/igf-esis.79.12}
}
Kostenlos starten →