EUVIMED · CrossrefJournal
Processing and Application of Ceramics
ISSN 1820-6131 · National Library of Serbia
Latest articles
Zirconia powders obtained from zirconyl nitrate by precipitation with the varied concentration of the ammonium hydroxide
Waste-derived $ \mathrm{Fe_3}\mathrm{O_4} $/ZnO composite for advanced fenton-like wastewater treatment
Master sintering curve and microstructure evolution of perovskite layer structured $ \mathrm{La_2}\mathrm{Ti_2}\mathrm{O_7} $ ceramics
Effect of sintering temperature on the structure and properties of in situ synthesized $ \mathrm{B_4}C $- $\mathrm{TiB_2} $ composites
Investigation of the effects of quercetin on the structure and properties of zinc-modified hydroxyapatites
Effect of $ \mathrm{B_2}\mathrm{O_3} $ addition on structure of nepheline glass-ceramics for dental applications
Lead-free high-entropy Ba($ \mathrm{Ti_{0.2}}\mathrm{Zr_{0.2}}\mathrm{Hf_{0.2}}\mathrm{Sn_{0.2}}\mathrm{Ce_{0.2}} $) $ \mathrm{O_3} $ ceramics: Structural stabilisation and impedance spectroscopic insights for high-temperature electronic applications
Direct determination of the contact area based on the concept of rounded indenter tip correction for Berkovich nanoindentation tests: Case study on silica glass
Sintering of nanopowder based on an ordered phase with a perovskite-type LaLu$ \mathrm{O_3} $:$ Yb^{3+} $structure
Microstructure evolution of highly ordered $ \mathrm{Bi_4}\mathrm{Si_3} \mathrm{O_{12}} $ microcrystals
Microstructure and mechanical properties of 3Y-TZP ceramics with low $ \mathrm{Al_2}{O_3} $ content for dental applications: Comparing vickers indentation fracture resistance and fracture toughness
Structure and properties of cordierite ceramics prepared from iron tailings and magnesite tailings
Modulating the microstructure and intermediate-temperature electrical properties of $ Gd^{3{+}} $/$ Yb^{3{+}} $ co-doped $ \mathrm{BaCeO_3} $-$ \mathrm{BaZrO_3} $ with sintering aids
Combinatory effects of tri- and pentavalent dopants on the dielectric behaviour of $ \mathrm{TiO_2} $ ceramics
Effect of ferroelectric layer thickness on performances of photovoltaic ITO/BNT-BZM/Ag cells
Bulk ceramics and thick film thermistors prepared from modified nickel manganite ($ \mathrm{Ni_{0.5}Cu_{0.2}Zn_{1.0}Mn_{1.3}O_4} $) powder
Fabrication of MgO transparent ceramics with $ \mathrm{Yb_2O_3} $ addition by spark plasma sintering
Effect of ferrosilicon nitride addition on slag corrosion resistance of MgO-C refractories
Preparation and characterization of $ ( \mathrm{La_{0.2}}\mathrm{Sm_{0.2}}\mathrm{Nd_{0.2}}\mathrm{Y_{0.2}}\mathrm{M_{0.2}})_2 $$ \mathrm{Zr_2O_7} $ (M = Yb or Lu) as potential thermal barrier coating materials
Preparation and characterization of $ ( \mathrm{La_{0.2}}\mathrm{Sm_{0.2}}\mathrm{Nd_{0.2}}\mathrm{Y_{0.2}}\mathrm{M_{0.2}})_2 $$ \mathrm{Zr_2O_7} $ (M = Yb or Lu) as potential thermal barrier coating materials
Effect of powder grinding and sintering temperature on structure and properties of Ba0.8Ca0.2TiO3 ceramics
Phase relations in the Eu2O3-Fe2O3 system at 1300 and 1400°C
In situ mullite whisker network formation for high strength and lightweight ceramic proppants
Microstructure, dielectric and ferroelectric properties of CaCu3-xZnxTi4-xCexO12 ceramics prepared via semi-wet route
Sm/Al modified Sn0.94Sb0.06O2 ceramics for NTC thermistors
Phase relations in the Nd2O3-Fe2O3 system: Structure and magnetic properties of perovskite NdFeO3 ceramics
Use of cobalt ferrite and activated carbon in supercapacitors
Structure and optical properties of La-doped ZnO thin films at room temperature
Electrical conductivity and electrical stability of Bi/Mg modified NiO ceramics for NTC thermistors
Tailoring multifunctional performance of Dy-doped (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics via optimizing ceramic processing
EUVIMED