EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bulk ceramics and thick film thermistors prepared from modified nickel manganite ($ \mathrm{Ni_{0.5}Cu_{0.2}Zn_{1.0}Mn_{1.3}O_4} $) powder

Nikola Markovic, Milica Kisic, Milan Bodic, Mirjana Damnjanovic, Goran Miskovic

Processing and Application of Ceramics · 2026 · 20 (2) · 152-158

DOI: 10.2298/pac2602152m ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processing and Application of Ceramics, 2026. Verfasst von Nikola Markovic und 4 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Science and Technological Development of the Republic of Serbia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

NTC thermistors in form of bulk ceramics and thick film, with the nominal composition \mathrm{Ni_{0.5}Cu_{0.2}Zn_{1.0}Mn_{1.3}O_4} , were prepared from fine manganite powder. The finemanganite powder with an average particle size of ~0.5 μm was obtained by calcination of homogeneous mixture of NiO, ZnO, CuO and \mathrm{Mn_2O_3} powders at 900°C for 4 h and subsequently combined planetary and agate milling. Phase composition and morphology of the manganite powder were analysed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Disk-shaped compacts were fabricated by uniaxial pressing at 0.2GPa and sintered at temperatures between 1100 and 1250°C for 2 h. The effects of sintering temperature on density, microstructure and DC electrical resistance were evaluated. Temperature-dependent resistance measurements performed in the range from −30 to 120°C yielded a thermistor constant of B = 2352K. The energy band gap, estimated from the reflectivity knee, was 0.56 eV. Furthermore, a thick-film paste was formulated from the synthesized manganite powder and used to fabricate segmented NTC thermistors. Electrical and thermal measurements, including sheet resistance, confirmed their suitability for further sensor applications.

Förderung

  • Ministry of Education, Science and Technological Development of the Republic of Serbia

Zitieren

APA

Markovic, N., Kisic, M., Bodic, M., Damnjanovic, M., & Miskovic, G. (2026). Bulk ceramics and thick film thermistors prepared from modified nickel manganite ($ \mathrm{Ni_{0.5}Cu_{0.2}Zn_{1.0}Mn_{1.3}O_4} $) powder. Processing and Application of Ceramics, 20(2), 152-158. https://doi.org/10.2298/pac2602152m

Vancouver

Markovic N, Kisic M, Bodic M, Damnjanovic M, Miskovic G. Bulk ceramics and thick film thermistors prepared from modified nickel manganite ($ \mathrm{Ni_{0.5}Cu_{0.2}Zn_{1.0}Mn_{1.3}O_4} $) powder. Processing and Application of Ceramics. 2026;20(2):152-158. doi:10.2298/pac2602152m

BibTeX
@article{Markovic2026,
  author = {Markovic, Nikola and Kisic, Milica and Bodic, Milan and Damnjanovic, Mirjana and Miskovic, Goran},
  title = {Bulk ceramics and thick film thermistors prepared from modified nickel manganite ($ \mathrmNi_0.5Cu_0.2Zn_1.0Mn_1.3O_4 $) powder},
  journal = {Processing and Application of Ceramics},
  year = {2026},
  volume = {20},
  number = {2},
  pages = {152--158},
  doi = {10.2298/pac2602152m}
}
Kostenlos starten →