Effect of ferrosilicon nitride addition on slag corrosion resistance of MgO-C refractories
Processing and Application of Ceramics · 2026 · 20 (2) · 166-174
DOI: 10.2298/pac2602166z ↗Kurz gefasst
Fachartikel in der Zeitschrift Processing and Application of Ceramics, 2026. Verfasst von Qi Zheng und 5 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
MgO-C refractories are extensively applied in metallurgical vessels such as converters and ladles, while their slag corrosion resistance requires further improvement to satisfy the demands of advanced smelting processes. In this work, ferrosilicon nitride was added to MgO-C refractories to enhance their slag corrosion resistance. The effects of ferrosilicon nitride on slag viscosity, refractorymicrostructure and slag corrosion resistance were systematically investigated, and the underlying action mechanism of ferrosilicon nitride was clarified. The results show that ferrosilicon nitride addition enhances the slag corrosion resistance of MgO-C refractories, and the corrosion depth decreases monotonically with increasing addition level, reaching a 27.4% reduction at 6 wt.% addition relative to the reference sample. At high temperatures, ferrosilicon nitride undergoes carbothermal reduction with the carbon from the matrix to produce SiC, \mathrm{N_2} gas and Fe-Si-C liquid phases. The in situ generated \mathrm{N_2} not only creates a high-nitrogen low-oxygen atmosphere inside the matrix to inhibit graphite oxidation and refine the pore structure, but also reacts with the interfacial slag to form high-melting-point compounds and increase the local slag viscosity. The elevated interfacial viscosity suppresses convective mass transfer and promotes the formation of a dense and continuous MgO barrier layer. Together with the matrix strengthening effect of in situ SiC, these synergistic effects eliminate the slag infiltration layer and effectively block molten slag penetration. This work provides a novel strategy for developing high-performance MgO-C refractories for harsh service conditions.
Zitieren
APA
Zheng, Q., Yu, J., Han, F., Liu, Z., Wen, T., & Yuan, L. (2026). Effect of ferrosilicon nitride addition on slag corrosion resistance of MgO-C refractories. Processing and Application of Ceramics, 20(2), 166-174. https://doi.org/10.2298/pac2602166z
Vancouver
Zheng Q, Yu J, Han F, Liu Z, Wen T, Yuan L. Effect of ferrosilicon nitride addition on slag corrosion resistance of MgO-C refractories. Processing and Application of Ceramics. 2026;20(2):166-174. doi:10.2298/pac2602166z
BibTeX
@article{Zheng2026,
author = {Zheng, Qi and Yu, Jingkun and Han, Fujun and Liu, Zhaoyang and Wen, Tianpeng and Yuan, Lei},
title = {Effect of ferrosilicon nitride addition on slag corrosion resistance of MgO-C refractories},
journal = {Processing and Application of Ceramics},
year = {2026},
volume = {20},
number = {2},
pages = {166--174},
doi = {10.2298/pac2602166z}
}
EUVIMED