EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Sintering of nanopowder based on an ordered phase with a perovskite-type LaLu$ \mathrm{O_3} $:$ Yb^{3+} $structure

Oksana Korniienko, Andrii Ragulya, Yuriy Yurchenko, Maryna Zamula, Oleksandr Shyrokov, Tamara Tomila, Tatiana Lobunets, Valeriy Kolesnichenko

Processing and Application of Ceramics · 2026 · 20 (1) · 82-90

DOI: 10.2298/pac2601082k ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processing and Application of Ceramics, 2026. Verfasst von Oksana Korniienko und 7 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present work developed a methodology for synthesising single-phase nanopowder based on an ordered phase with LaLuO3 perovskite type structure. The LaLu \mathrm{O_3} : Yb^{3+} nanopowder, doped with 2mol% Yb^{3+} , was synthesised by wet-chemical method from precursor nitrate solution and thermal treated to form pure perovskite phase. The synthesised nanopowder was comprehensively studied using IR spectroscopy, X-ray diffraction, scanning electron microscopy and adsorption-structural methods. The results of the X-ray diffraction analysis indicate that the synthesised powder is single-phase, with all the formed diffraction peaks corresponding to the ordered structure of the LaLu \mathrm{O_3} perovskite type. The unit cell parameters of the LaLu \mathrm{O_3} : Yb^{3+} (2mol%) phase are: a = 0.6023 nm, b = 0.8385 nm, c = 0.5822 nm and V = 0.294 nm3 whereas the average crystallite size is 51.2 nm. The nanopowder was consolidated using the spark plasma sintering (SPS) technique at 1380°C and 50MPa with dwell of 15min, resulting in a fully dense ceramic material of 8.16 g/ cm^{3} (i.e. 99.54% theoretical density).

Zitieren

APA

Korniienko, O., Ragulya, A., Yurchenko, Y., Zamula, M., Shyrokov, O., Tomila, T., Lobunets, T., & Kolesnichenko, V. (2026). Sintering of nanopowder based on an ordered phase with a perovskite-type LaLu$ \mathrm{O_3} $:$ Yb^{3+} $structure. Processing and Application of Ceramics, 20(1), 82-90. https://doi.org/10.2298/pac2601082k

Vancouver

Korniienko O, Ragulya A, Yurchenko Y, Zamula M, Shyrokov O, Tomila T, et al. Sintering of nanopowder based on an ordered phase with a perovskite-type LaLu$ \mathrm{O_3} $:$ Yb^{3+} $structure. Processing and Application of Ceramics. 2026;20(1):82-90. doi:10.2298/pac2601082k

BibTeX
@article{Korniienko2026,
  author = {Korniienko, Oksana and Ragulya, Andrii and Yurchenko, Yuriy and Zamula, Maryna and Shyrokov, Oleksandr and Tomila, Tamara and Lobunets, Tatiana and Kolesnichenko, Valeriy},
  title = {Sintering of nanopowder based on an ordered phase with a perovskite-type LaLu$ \mathrmO_3 $:$ Yb^3+ $structure},
  journal = {Processing and Application of Ceramics},
  year = {2026},
  volume = {20},
  number = {1},
  pages = {82--90},
  doi = {10.2298/pac2601082k}
}
Kostenlos starten →