EUVIMEDEUVIMED entdecken
Crossref

Comparative evaluation of 3D-printed resin endocrowns and CAD/CAM milled ceramic endocrowns in endodontically treated molars

Ritika Satija

Bioinformation · 31.10.2026 · 22 (10) · 6448-6451

DOI: 10.6026/973206300226448 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioinformation, online erschienen am 31.10.2026. Verfasst von Ritika Satija.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Endodontically treated molars are highly susceptible to fracture and the optimal fabrication method for endocrowns between additive 3D printing and subtractive CAD/CAM milling remains uncertain. This in vitro comparative study evaluated 120 standardized mandibular first molar endocrowns fabricated using 3D-printed resin (n = 60) or CAD/CAM-milled lithium disilicate ceramic (n=60), assessing marginal and internal fit, fracture resistance, micro leakage, color stability and flexural strength. CAD/CAM-milled lithium disilicate endocrowns showed significantly better marginal fit (63.4 +/- 12.1 versus 89.7 +/- 15.3 μm; p < 0.001) and fracture resistance (2847 +/- 312 versus 1964 +/- 278 N; p < 0.001), whereas 3D-printed resin endocrowns showed significantly lower micro leakage (p = 0.01) and better color stability after thermocycling (p = 0.004), with comparable internal fit (p = 0.09). CAD/CAM-milled lithium disilicate endocrowns are preferable for posterior teeth subjected to high occlusal loads, while 3D-printed resin endocrowns provide a cost-effective and clinically acceptable alternative with favourable short-term performance. This study advances current knowledge by establishing a comparative evidence-based framework for material selection in endocrown fabrication and supporting future clinical trials to validate these findings under functional conditions.

Zitieren

APA

Satija, R. (2026). Comparative evaluation of 3D-printed resin endocrowns and CAD/CAM milled ceramic endocrowns in endodontically treated molars. Bioinformation, 22(10), 6448-6451. https://doi.org/10.6026/973206300226448

Vancouver

Satija R. Comparative evaluation of 3D-printed resin endocrowns and CAD/CAM milled ceramic endocrowns in endodontically treated molars. Bioinformation. 2026;22(10):6448-6451. doi:10.6026/973206300226448

BibTeX
@article{Satija2026,
  author = {Satija, Ritika},
  title = {Comparative evaluation of 3D-printed resin endocrowns and CAD/CAM milled ceramic endocrowns in endodontically treated molars},
  journal = {Bioinformation},
  year = {2026},
  volume = {22},
  number = {10},
  pages = {6448--6451},
  doi = {10.6026/973206300226448}
}
Kostenlos starten →