Biomechanical Assessment of Endodontically Treated Molars Restored by Endocrowns Made from Different CAD/CAM Materials
Materials · 12.01.2023 · 16 (2) · 764
DOI: 10.3390/ma16020764 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 12.01.2023. Verfasst von Mhd Ayham Darwich und 6 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Biomedical Engineering, Al-Andalus University for Medical Sciences, Tartous, Syria. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The aim of this study was to evaluate the deflection and stress distribution in endodontically treated molars restored by endocrowns from different materials available for the computer-aided design/computer-aided manufacturing (CAD/CAM) technique using three-dimensional finite element analysis. The models represented extensively damaged molars restored by endocrowns from the following materials: translucent zirconia; zirconia-reinforced glass ceramic; lithium disilicate glass ceramic; polymer-infiltrated ceramic network (PICN) and resin nanoceramic. Axial and oblique loadings were applied and the resulting stress distribution and deflection were analyzed. The Mohr–Coulomb (MC) ratio was also calculated in all models. The translucent zirconia endocrown showed the highest stress concentration within it and the least stress in dental structures. The resin nanoceramic model was associated with the greatest stress concentration in dental tissues, followed by the PICN model. Stress was also concentrated in the distal region of the cement layer. The MC ratio in the cement was higher than 1 in the resin nanoceramic model. Oblique loading caused higher stresses in all components and greater displacement than axial loading, whatever the material of the endocrown was. The translucent zirconia model recorded deflections of enamel and dentin (38.4 µm and 35.7 µm, respectively), while resin nanoceramic showed the highest stress concentration and displacement in the tooth–endocrown complex.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Biomedical Engineering, Al-Andalus University for Medical Sciences, Tartous, Syria.
- Faculty of Technical Engineering, University of Tartous, Tartous, Syria.
- Faculty of Dentistry, Damascus University, Damascus, Syria.
- Faculty of Mechanical Engineering and Informatics, University of Miskolc, 3515 Miskolc, Hungary.
- Faculty of Mechanical Engineering, Institute of Mechanics, Otto Von Guericke University Magdeburg, Universitätsplatz 2, 39106 Magdeburg, Germany.
ORCID-Profile: Mhd Ayham Darwich, Abeer Aljareh, Szabolcs Szávai, Hasan Mhd Nazha, Fabian Duvigneau
Zitieren
APA
Darwich, M. A., Aljareh, A., Alhouri, N., Szávai, S., Nazha, H. M., Duvigneau, F., & Juhre, D. (2023). Biomechanical Assessment of Endodontically Treated Molars Restored by Endocrowns Made from Different CAD/CAM Materials. Materials, 16(2), 764. https://doi.org/10.3390/ma16020764
Vancouver
Darwich MA, Aljareh A, Alhouri N, Szávai S, Nazha HM, Duvigneau F, et al. Biomechanical Assessment of Endodontically Treated Molars Restored by Endocrowns Made from Different CAD/CAM Materials. Materials. 2023;16(2):764. doi:10.3390/ma16020764
BibTeX
@article{Darwich2023,
author = {Darwich, Mhd Ayham and Aljareh, Abeer and Alhouri, Nabil and Szávai, Szabolcs and Nazha, Hasan Mhd and Duvigneau, Fabian and Juhre, Daniel},
title = {Biomechanical Assessment of Endodontically Treated Molars Restored by Endocrowns Made from Different CAD/CAM Materials},
journal = {Materials},
year = {2023},
volume = {16},
number = {2},
pages = {764},
doi = {10.3390/ma16020764}
}
EUVIMED