Peel Bond Strength of Soft Liner Using Dental CAD/CAM and Conventional Acrylic Denture Base Materials Treated by Sandblast Technique
Iraqi Journal of Medical and Health Sciences · 12.02.2025 · 2 (1) · 1-7
DOI: 10.51173/ijmhs.v2i1.2 ↗Kurz gefasst
Fachartikel in der Zeitschrift Iraqi Journal of Medical and Health Sciences, online erschienen am 12.02.2025. Verfasst von Ali Radhi Neamah und 2 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Background
One of the most serious problems with silicone soft liners is that they cannot cling to the acrylic denture foundation. The peel test is an appropriate method for assessing the binding strength of soft liners to denture base resin because the forces that the lining material is clinically exposed to are closely linked to the peel and tear test. Objective of study: Analyzing the impact of sandblasting on the soft liners' ability to adhere to denture base resins' peel bonds. Materials and Methods: Forty samples 64 x 10x 3 mm (length, width, and thickness), respectively of heat-cured acrylic soft denture liner materials. According to the types of material used, 20 specimens for CAD/ CAM and other 20 for traditional acrylic denture base material were constructed. The specimens were subdivided into two main groups (control group and sandblasting group). CAD/CAM specimens were created by cutting Pre-polymerized PMMA blocks with an In Lab MC X5-miller for PMMA plastic burs.
Results
The results showed that the sandblast treatment produced a higher mean value of Peel strength for conventional acrylic specimens in comparison to control. An Independent t-test reveals no significant difference (P>0.05) between groups. For the CAD/CAM approach, the sandblast group produced the lowest mean value of peel bond strength. Additionally, significant differences (P
Zitieren
APA
Neamah, A. R., Kati, F. A., & Rehman, I. U. (2025). Peel Bond Strength of Soft Liner Using Dental CAD/CAM and Conventional Acrylic Denture Base Materials Treated by Sandblast Technique. Iraqi Journal of Medical and Health Sciences, 2(1), 1-7. https://doi.org/10.51173/ijmhs.v2i1.2
Vancouver
Neamah AR, Kati FA, Rehman IU. Peel Bond Strength of Soft Liner Using Dental CAD/CAM and Conventional Acrylic Denture Base Materials Treated by Sandblast Technique. Iraqi Journal of Medical and Health Sciences. 2025;2(1):1-7. doi:10.51173/ijmhs.v2i1.2
BibTeX
@article{Neamah2025,
author = {Neamah, Ali Radhi and Kati, Firas Abd and Rehman, Ihtesham Ur},
title = {Peel Bond Strength of Soft Liner Using Dental CAD/CAM and Conventional Acrylic Denture Base Materials Treated by Sandblast Technique},
journal = {Iraqi Journal of Medical and Health Sciences},
year = {2025},
volume = {2},
number = {1},
pages = {1--7},
doi = {10.51173/ijmhs.v2i1.2}
}
EUVIMED