EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Bonding Efficiency between Artificial Teeth and Denture Base in CAD/CAM and Conventional Complete Removable Dentures

Mariya Dimitrova iD, Angelina Vlahova, Ilian Hristov, Rada Kazakova iD

Materials · 27.06.2024 · 17 (13) · 3138

DOI: 10.3390/ma17133138 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 27.06.2024. Verfasst von Mariya Dimitrova und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthetic Dentistry, Faculty of Dental Medicine, Medical University of Plovdiv, 4000 Plovdiv, Bulgaria. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 138 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Medical University of Plovdiv.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A common challenge encountered with both traditional and digitally produced dentures involves the extraction of artificial teeth from the denture base. This narrative review seeks to present an updated perspective on the adherence of synthetic teeth for denture base materials, employing diverse methods. Dental technicians often employ chemical approaches and mechanical techniques (including abrasion, laser treatment, and abrasive blasting) to augment the retention of denture teeth. However, the efficacy of these treatments remains uncertain. In certain instances, specific combinations of Denture Base Resin (DBR) materials and artificial teeth exhibit improved performance in conventional heat-cured dentures following these treatments. The primary reasons for failure are attributed to material incompatibility and inadequate copolymerization. As new denture fabrication techniques and materials continue to emerge, further research is imperative to identify optimal tooth-DBR combinations. Notably, 3D-printed tooth–DBR combinations have demonstrated reduced bond strength and less favorable failure patterns, while utilizing milled and traditional combinations appears to be a more prudent choice until advancements in additive manufacturing enhance the reliability of 3D-printing methods.

Schlagwörter

Stichwörter der Autor:innen

3D-printingCAD/CAMadhesionartificial teethcomplete denturesdenture base polymersmilling

Autor:innen und Institutionen

  • Department of Prosthetic Dentistry, Faculty of Dental Medicine, Medical University of Plovdiv, 4000 Plovdiv, Bulgaria.
  • CAD/CAM Center of Dental Medicine, Research Institute, Medical University of Plovdiv, 4000 Plovdiv, Bulgaria.

ORCID-Profile: Mariya Dimitrova, Rada Kazakova

Förderung

  • Medical University of Plovdiv

Zitieren

APA

Dimitrova, M., Vlahova, A., Hristov, I., & Kazakova, R. (2024). Bonding Efficiency between Artificial Teeth and Denture Base in CAD/CAM and Conventional Complete Removable Dentures. Materials, 17(13), 3138. https://doi.org/10.3390/ma17133138

Vancouver

Dimitrova M, Vlahova A, Hristov I, Kazakova R. Bonding Efficiency between Artificial Teeth and Denture Base in CAD/CAM and Conventional Complete Removable Dentures. Materials. 2024;17(13):3138. doi:10.3390/ma17133138

BibTeX
@article{Dimitrova2024,
  author = {Dimitrova, Mariya and Vlahova, Angelina and Hristov, Ilian and Kazakova, Rada},
  title = {Bonding Efficiency between Artificial Teeth and Denture Base in CAD/CAM and Conventional Complete Removable Dentures},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {13},
  pages = {3138},
  doi = {10.3390/ma17133138}
}
Kostenlos starten →