EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hardware and Software Setup for Quantitative 23Na Magnetic Resonance Imaging at 3T: A Phantom Study

Giulio Giovannetti iD, Alessandra Flori iD, Nicola Martini, Filippo Cademartiri iD, Giovanni Donato Aquaro iD, Alessandro Pingitore iD, Francesca Frijia

Sensors · 2024

DOI: 10.3390/s24092716 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2024. Verfasst von Giulio Giovannetti und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Clinical Physiology, National Council of Research, Via G. Moruzzi 1, 56124 Pisa, Italy. Hauptthemen laut MEDLINE: Phantoms, Imaging, Magnetic Resonance Imaging, Software. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnetic resonance (MR) with sodium (23Na) is a noninvasive tool providing quantitative biochemical information regarding physiology, cellular metabolism, and viability, with the potential to extend MR beyond anatomical proton imaging. However, when using clinical scanners, the low detectable 23Na signal and the low 23Na gyromagnetic ratio require the design of dedicated radiofrequency (RF) coils tuned to the 23Na Larmor frequency and sequences, as well as the development of dedicated phantoms for testing the image quality, and an MR scanner with multinuclear spectroscopy (MNS) capabilities. In this work, we propose a hardware and software setup for evaluating the potential of 23Na magnetic resonance imaging (MRI) with a clinical scanner. In particular, the reliability of the proposed setup and the reproducibility of the measurements were verified by multiple acquisitions from a 3T MR scanner using a homebuilt RF volume coil and a dedicated sequence for the imaging of a phantom specifically designed for evaluating the accuracy of the technique. The final goal of this study is to propose a setup for standardizing clinical and research 23Na MRI protocols.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Phantoms, ImagingMagnetic Resonance ImagingSoftwareSodiumHumansSodium IsotopesImage Processing, Computer-AssistedReproducibility of Results

Stichwörter der Autor:innen

23Na coil design23Na magnetic resonance imaging

Substanzen

SodiumSodium Isotopes

Autor:innen und Institutionen

  • Institute of Clinical Physiology, National Council of Research, Via G. Moruzzi 1, 56124 Pisa, Italy.
  • Bioengineering Unit, Fondazione G. Monasterio CNR-Regione Toscana, 56124 Pisa, Italy.
  • Department of Radiology, Fondazione G. Monasterio CNR-Regione Toscana, 56124 Pisa, Italy.
  • Department of Surgical, Medical, Molecular and Critical Area Pathology, University of Pisa, 56126 Pisa, Italy.

ORCID-Profile: Giulio Giovannetti, Alessandra Flori, Filippo Cademartiri, Giovanni Donato Aquaro, Alessandro Pingitore

Zitieren

APA

Giovannetti, G., Flori, A., Martini, N., Cademartiri, F., Aquaro, G. D., Pingitore, A., & Frijia, F. (2024). Hardware and Software Setup for Quantitative 23Na Magnetic Resonance Imaging at 3T: A Phantom Study. Sensors. https://doi.org/10.3390/s24092716

Vancouver

Giovannetti G, Flori A, Martini N, Cademartiri F, Aquaro GD, Pingitore A, et al. Hardware and Software Setup for Quantitative 23Na Magnetic Resonance Imaging at 3T: A Phantom Study. Sensors. 2024. doi:10.3390/s24092716

BibTeX
@article{Giovannetti2024,
  author = {Giovannetti, Giulio and Flori, Alessandra and Martini, Nicola and Cademartiri, Filippo and Aquaro, Giovanni Donato and Pingitore, Alessandro and Frijia, Francesca},
  title = {Hardware and Software Setup for Quantitative 23Na Magnetic Resonance Imaging at 3T: A Phantom Study},
  journal = {Sensors},
  year = {2024},
  doi = {10.3390/s24092716}
}
Kostenlos starten →