EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and Characterization of PLA/Biochar Bio-Composites Containing Different Biochar Types and Content

Katerina Papadopoulou, Panagiotis A Klonos iD, Apostolos Kyritsis, Evangelia Tarani iD, Konstantinos Chrissafis, Ondrej Mašek, Konstantinos Tsachouridis, Antonios D Anastasiou iD, Dimitrios N Bikiaris iD

Polymers · 21.01.2025 · 17 (3) · 263

DOI: 10.3390/polym17030263 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 21.01.2025. Verfasst von Katerina Papadopoulou und 8 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Polymer Chemistry and Technology, Department of Chemistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EU, European Community’s Horizon 2020 Framework Program H2020.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A series of poly(lactic acid) (PLA)/biochar (BC) bio-composites filled with low amounts (1–5 wt%) of BC were prepared and characterized. The synthesis involved the in situ ring-opening polymerization (ROP) of lactide in the presence of two different types of BC named SWP550 and SWP700, having been produced by pyrolysis of softwood pellets at two different temperatures, 550 and 700 °C, respectively. The bio-composites were characterized by complementary techniques. The successful synthesis of PLA and PLA/BC bio-composites was directly demonstrated by the formation of new bonds, most probably between PLA and BC. Indirect evidence for that was obtained by the systematic molar mass reduction in the presence of BC. BC was found by transmission electron microscopy (TEM) micrographs to be well dispersed at the nanosize level, indicating that in situ polymerization is a technique quite efficient for producing bio-composites with finely dispersed BC additive. The molecular dynamics mapping is performed here via dielectric spectroscopy, moreover, for the first time in these PLA/BC systems. The strong PLA/BC interactions (due to the grafting) led to a systematic deceleration of segmental mobility (elevation of the Tg) in the bio-composites despite the opposite effect expected by the decrease in molar mass with the BC content increasing. In addition, the same interactions and chain-length reduction are responsible for the slight suppression of the PLA’s crystallizability. The effects are slightly stronger for SWP700 as compared to SWP550. The crystal structure is rather similar between the unfilled matrix and the bio-composites, whereas, based on the overall data, the semicrystalline morphology is expected to be tighter in the bio-composites. The thermal stability and decomposition kinetics were also thoroughly studied. All materials exhibit good resistance to thermal degradation. Additionally, the mechanical properties of bio-composites were evaluated by tensile testing and found slightly enhanced at low biochar contents and decreasing thereafter due to the low molecular weight of bio-composites with the larger BC contents.

Schlagwörter

Stichwörter der Autor:innen

bio-compositesbiocharenzymatic hydrolysisin situ polymerizationmechanical propertiespoly(lactic acid)segmental mobilitythermal properties

Autor:innen und Institutionen

  • Laboratory of Polymer Chemistry and Technology, Department of Chemistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece.
  • Department of Physics, National Technical University of Athens, Zografou Campus, 15780 Athens, Greece.
  • Laboratory of Advanced Materials and Devices, Department of Physics, Aristotle University of Thessaloniki, GR-54124 Thessaloniki, Greece.
  • UK Biochar Research Centre, School of GeoSciences, University of Edinburgh, Alexander Crum Brown Road, Edinburgh EH9 3FF, UK.
  • Department of Chemical Engineering, University of Manchester, Manchester M1 9PL, UK.

ORCID-Profile: Panagiotis A Klonos, Evangelia Tarani, Antonios D Anastasiou, Dimitrios N Bikiaris

Förderung

  • EU
  • European Community’s Horizon 2020 Framework Program H2020

Zitieren

APA

Papadopoulou, K., Klonos, P. A., Kyritsis, A., Tarani, E., Chrissafis, K., Mašek, O., Tsachouridis, K., Anastasiou, A. D., & Bikiaris, D. N. (2025). Synthesis and Characterization of PLA/Biochar Bio-Composites Containing Different Biochar Types and Content. Polymers, 17(3), 263. https://doi.org/10.3390/polym17030263

Vancouver

Papadopoulou K, Klonos PA, Kyritsis A, Tarani E, Chrissafis K, Mašek O, et al. Synthesis and Characterization of PLA/Biochar Bio-Composites Containing Different Biochar Types and Content. Polymers. 2025;17(3):263. doi:10.3390/polym17030263

BibTeX
@article{Papadopoulou2025,
  author = {Papadopoulou, Katerina and Klonos, Panagiotis A and Kyritsis, Apostolos and Tarani, Evangelia and Chrissafis, Konstantinos and Mašek, Ondrej and Tsachouridis, Konstantinos and Anastasiou, Antonios D and Bikiaris, Dimitrios N},
  title = {Synthesis and Characterization of PLA/Biochar Bio-Composites Containing Different Biochar Types and Content},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {3},
  pages = {263},
  doi = {10.3390/polym17030263}
}
Kostenlos starten →