EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Recycling Cork/PLA Bio-Composites Through Dissolution–Precipitation Method

Nuno Gama, Bruno Godinho, Ana Barros-Timmons, Artur Ferreira

Recycling · 17.01.2025 · 10 (1) · 13

DOI: 10.3390/recycling10010013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Recycling, online erschienen am 17.01.2025. Verfasst von Nuno Gama und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The FCT/MCTES (PIDDAC).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Composites can offer superior properties and versatility but raise environmental concerns due to disposal challenges, even when made from bio-based materials. Hence, in this study, cork/PLA bio-based composites were recycled using dissolution–precipitation principles. First, virgin cork and PLA were extruded to produce cork/PLA bio-composites which were then recycled using dichloromethane to separate the biomass filler from the biopolymer matrix. It was found that 80.9% ± 2.4 of cork and 85.9% ± 5.9 of PLA were successfully recovered, with the recovered materials retaining the same chemical structure as the virgin counterparts. The cork maintained its honeycomb structure after extrusion and recycling, indicating its resistance to the process. As expected, adding cork to PLA reduced the composite’s mechanical performance, but the recovered PLA showed similar mechanical properties to the virgin PLA. Both virgin PLA and composite filaments displayed similar glass transition (Tg) and cold crystallization (Tcrist) temperatures, but the recovered PLA presented slightly lower values, likely due to some PLA degradation. Despite this, all recovered materials exhibited similar thermal stability to their virgin counterparts. Cork is primarily used in the production of cork stoppers, and, hence, its recycling efforts mainly focus on reusing cork from stoppers rather than from composites. Therefore, the recycling process proposed successfully separated cork from PLA composites, with the recovered materials maintaining comparable properties, highlighting the potential for improving the eco-efficiency of composites.

Förderung

  • The FCT/MCTES (PIDDAC)

Zitieren

APA

Gama, N., Godinho, B., Barros-Timmons, A., & Ferreira, A. (2025). Recycling Cork/PLA Bio-Composites Through Dissolution–Precipitation Method. Recycling, 10(1), 13. https://doi.org/10.3390/recycling10010013

Vancouver

Gama N, Godinho B, Barros-Timmons A, Ferreira A. Recycling Cork/PLA Bio-Composites Through Dissolution–Precipitation Method. Recycling. 2025;10(1):13. doi:10.3390/recycling10010013

BibTeX
@article{Gama2025,
  author = {Gama, Nuno and Godinho, Bruno and Barros-Timmons, Ana and Ferreira, Artur},
  title = {Recycling Cork/PLA Bio-Composites Through Dissolution–Precipitation Method},
  journal = {Recycling},
  year = {2025},
  volume = {10},
  number = {1},
  pages = {13},
  doi = {10.3390/recycling10010013}
}
Kostenlos starten →