EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Characterization of PLA/PEG/Flax Bio Composites: Influence of Fiber Treatment and Plasticizer Content for Bone-Related Bioengineering Applications

Muhammad Imran, Arvydas Palevicius, Fernando Leite, Sigita Urbaite, Giedrius Janusas

Applied Sciences · 10.11.2026 · 16 (22) · 11140

DOI: 10.3390/app162211140 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 10.11.2026. Verfasst von Muhammad Imran und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biodegradable polymer composites are promising materials for orthopaedic applications because their lower stiffness compared with metallic implants may reduce stress shielding effects. In this study, PLA-based composites containing PEG (0–14 wt%) and flax fiber (5–10 wt%) were fabricated by compression moulding using untreated and pretreated flax fibers, with potential application in orthopaedic fixation plates. The composites were analysed by Scanning Electron Microscopy (SEM), Thermogravimetric analysis (TGA) and Differential Scanning Calorimetry (DSC), and their tensile, flexural and impact properties were evaluated. The tensile and flexural strength and modulus of composites were improved by approximately 20–30%. SEM results showed that fiber-matrix adhesion was greater than fiber pull-out for the fibers in the fiber-treated samples compared with those containing untreated fibers. Increasing PEG content, the strength and stiffness decreased, and impact toughness increased, particularly for the intermediate-PEG formulations (S3, S4). Similar thermal stability across formulations (TGA) suggested that the effects of treatment and PEG were not influenced on thermal characteristics, but on interfacial and mechanical properties. DSC results indicated that the effects of treatment were surface-limited and not bulk. Thus, the interfacial strength was controlled by fiber treatment, and the stiffness–toughness trade-off was controlled by PEG showing that moderate PEG (S3, S4) treatment was ideal for the mechanical properties of biodegradable orthopaedic fixation.

Zitieren

APA

Imran, M., Palevicius, A., Leite, F., Urbaite, S., & Janusas, G. (2026). Development and Characterization of PLA/PEG/Flax Bio Composites: Influence of Fiber Treatment and Plasticizer Content for Bone-Related Bioengineering Applications. Applied Sciences, 16(22), 11140. https://doi.org/10.3390/app162211140

Vancouver

Imran M, Palevicius A, Leite F, Urbaite S, Janusas G. Development and Characterization of PLA/PEG/Flax Bio Composites: Influence of Fiber Treatment and Plasticizer Content for Bone-Related Bioengineering Applications. Applied Sciences. 2026;16(22):11140. doi:10.3390/app162211140

BibTeX
@article{Imran2026,
  author = {Imran, Muhammad and Palevicius, Arvydas and Leite, Fernando and Urbaite, Sigita and Janusas, Giedrius},
  title = {Development and Characterization of PLA/PEG/Flax Bio Composites: Influence of Fiber Treatment and Plasticizer Content for Bone-Related Bioengineering Applications},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {11140},
  doi = {10.3390/app162211140}
}
Kostenlos starten →