EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of the Grapevine Biochar on the Properties of PLA Composites

Chien-Chung Huang, Chun-Wei Chang, Kousar Jahan, Tzong-Ming Wu iD, Yeng-Fong Shih

Materials · 13.01.2023 · 16 (2) · 816

DOI: 10.3390/ma16020816 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.01.2023. Verfasst von Chien-Chung Huang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Chemistry, Chaoyang University of Technology, Taichung 41349, Taiwan. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology of Taiwan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study found that biochar made from grapevines (GVC), an agricultural waste product, can be used as a nucleating agent to promote the crystallization of polylactic acid (PLA). Differential scanning calorimetry (DSC) analysis of GVC/PLA composites showed that different particle sizes (200 and 100 mesh size) and amounts (1 wt%, 10 wt%) of biochar affect the re-crystallization of PLA, with 200 mesh GVC in the amount of 10 wt% being the most significant. In addition, it was found that there were two peaks related to imperfect and perfect crystals in the Tm part for GVC/PLA composites. TGA analysis showed that adding GVC tends to lower the maximum decomposition temperature of PLA, revealing that GVC may accelerate the degradation reaction of PLA. This research also studied the effects of GVC in various particle sizes and amounts on the mechanical properties and degradation of PLA. The results revealed that the tensile and impact strengths of GVC/PLA composite could reach 79.79 MPa and 22.67 J/m, respectively, and the increments were 41.4% and 32.1%, greater than those of pristine PLA. Moreover, the molecular weight of PLA decreased as the amount of GVC increased. Therefore, GVC particles can be used as reinforcing fillers for PLA to improve its mechanical properties and adjust its molecular weight. These agricultural-waste-reinforced biocomposites can reduce both greenhouse gas (GHG) emissions and the cost of biodegradable polymers and achieve the goals of a circular economy.

Schlagwörter

Stichwörter der Autor:innen

PLAagricultural wastedegradationgrapevine char

Autor:innen und Institutionen

  • Department of Applied Chemistry, Chaoyang University of Technology, Taichung 41349, Taiwan.
  • Department of Aeronautical Engineering, Chaoyang University of Technology, Taichung 41349, Taiwan.
  • Department of Materials Science and Engineering, National Chung Hsing University, Taichung 402, Taiwan.

ORCID-Profile: Tzong-Ming Wu

Förderung

  • Ministry of Science and Technology of Taiwan

Zitieren

APA

Huang, C. C., Chang, C. W., Jahan, K., Wu, T. M., & Shih, Y. F. (2023). Effects of the Grapevine Biochar on the Properties of PLA Composites. Materials, 16(2), 816. https://doi.org/10.3390/ma16020816

Vancouver

Huang CC, Chang CW, Jahan K, Wu TM, Shih YF. Effects of the Grapevine Biochar on the Properties of PLA Composites. Materials. 2023;16(2):816. doi:10.3390/ma16020816

BibTeX
@article{Huang2023,
  author = {Huang, Chien-Chung and Chang, Chun-Wei and Jahan, Kousar and Wu, Tzong-Ming and Shih, Yeng-Fong},
  title = {Effects of the Grapevine Biochar on the Properties of PLA Composites},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {2},
  pages = {816},
  doi = {10.3390/ma16020816}
}
Kostenlos starten →