EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hygrothermal Durability and Damage Evolution of Bio-Epoxy-Based Composites Reinforced with Different Fibre Types

Abdullah Iftikhar iD, Allan Manalo, Zaneta Senselova, Wahid Ferdous iD, Mazhar Peerzada, Hannah Seligmann, Kate Nguyen iD, Brahim Benmokrane

Polymers · 25.12.2025 · 18 (1) · 58

DOI: 10.3390/polym18010058 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 25.12.2025. Verfasst von Abdullah Iftikhar und 7 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Future Materials, University of Southern Queensland, Toowoomba, QLD 4350, Australia. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ARC Discovery Project, Natural Science and Engineering Research Council (NSERC) of Canada, University of Southern Queensland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates hygrothermal durability of bio-epoxy composites reinforced with carbon, E-glass, basalt, and flax fibres. Fibre yarns and bio-composites were exposed for 3000 h at 60 °C and 98% relative humidity. The tensile strength reduction in the fibres and the interfacial shear strength (IFSS) reduction in the composites were assessed after ageing. Chemical deterioration was evaluated using energy-dispersive X-ray spectroscopy (EDS); morphological changes in fibres and composites fracture surfaces were examined using a scanning electron microscope (SEM). Results indicated that the durability was significantly influenced by fibre types. Tensile strength reduction was higher in carbon, glass and basalt compared to flax yarns because of chemical degradation of the sizing layer in synthetic fibres, while only physical damage was observed in flax. The IFSS reduction was highest in flax composites (10%), and lowest in carbon (4%). EDS indicated the hydrolysis and erosion of fibre sizing, with reduced silica content in glass and basalt fibres. SEM revealed matrix-dominated failure in carbon/bio-epoxy, interfacial debonding in glass and basalt composites, fibre slip and pull-out in flax/bio-epoxy. Overall, the results highlighted damage propagation pathways and demonstrated that bio-epoxy composites exhibited reasonable performance under hygrothermal ageing, supporting their potential as a sustainable alternative in durability-critical applications.

Schlagwörter

Stichwörter der Autor:innen

bio-based polymersbio-compositesenvironmental ageingfracture behaviourhygrothermal durabilitymaterial degradation

Autor:innen und Institutionen

  • Centre for Future Materials, University of Southern Queensland, Toowoomba, QLD 4350, Australia.
  • School of Engineering, RMIT University, GPO Box 2476, Melbourne, VIC 3001, Australia.
  • Department of Civil and Building Engineering, University of Sherbrooke, Sherbrooke, QC J1K 2R1, Canada.

ORCID-Profile: Abdullah Iftikhar, Wahid Ferdous, Kate Nguyen

Förderung

  • ARC Discovery Project
  • Natural Science and Engineering Research Council (NSERC) of Canada
  • University of Southern Queensland

Zitieren

APA

Iftikhar, A., Manalo, A., Senselova, Z., Ferdous, W., Peerzada, M., Seligmann, H., Nguyen, K., & Benmokrane, B. (2025). Hygrothermal Durability and Damage Evolution of Bio-Epoxy-Based Composites Reinforced with Different Fibre Types. Polymers, 18(1), 58. https://doi.org/10.3390/polym18010058

Vancouver

Iftikhar A, Manalo A, Senselova Z, Ferdous W, Peerzada M, Seligmann H, et al. Hygrothermal Durability and Damage Evolution of Bio-Epoxy-Based Composites Reinforced with Different Fibre Types. Polymers. 2025;18(1):58. doi:10.3390/polym18010058

BibTeX
@article{Iftikhar2025,
  author = {Iftikhar, Abdullah and Manalo, Allan and Senselova, Zaneta and Ferdous, Wahid and Peerzada, Mazhar and Seligmann, Hannah and Nguyen, Kate and Benmokrane, Brahim},
  title = {Hygrothermal Durability and Damage Evolution of Bio-Epoxy-Based Composites Reinforced with Different Fibre Types},
  journal = {Polymers},
  year = {2025},
  volume = {18},
  number = {1},
  pages = {58},
  doi = {10.3390/polym18010058}
}
Kostenlos starten →