EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cytotoxic Effects of Milled, 3D-Printed, and Conventional Methacrylate-Based Resins After Exposure to Denture Cleansers: A Preliminary In Vitro Screening Study

Rumeysa Bayram Büyükokuroğlu iD, Gülsüm Sayın Özel

Materials · 09.11.2026 · 19 (21) · 4761

DOI: 10.3390/ma19214761 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.11.2026. Verfasst von Rumeysa Bayram Büyükokuroğlu und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, School of Dentistry, Istanbul Medipol University, Istanbul 34810, Türkiye. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluated cellular responses to extracts of CAD/CAM-milled PMMA, 3D-printed methacrylate-based resin, and conventionally heat-polymerized PMMA after denture cleanser exposure. Specimens (MTT, n = 240; BrdU, n = 36) were assigned to Corega, chlorhexidine, Listerine, or distilled water. Following accelerated cumulative exposure (1825 min; not simulating clinical use), extracts were applied to human gingival fibroblasts. Cellular metabolic activity was assessed by MTT absorbance, DNA synthesis-associated proliferative activity by quantitative BrdU immunofluorescence, and morphology and F-actin organization qualitatively. Material and cleansing solution significantly affected MTT absorbance (both p < 0.001), with a significant interaction (p = 0.008). CAD/CAM-milled and 3D-printed materials exhibited higher MTT absorbance than conventional PMMA (p < 0.001 and p = 0.003, respectively), without a significant difference between them (p = 0.071). Distilled water yielded higher MTT absorbance than all cleansers (all p < 0.001). BrdU labeling showed a significant cleansing solution effect (p < 0.001) but no significant material effect or interaction. In this preliminary screening study, cleansing solution affected both metabolic and DNA synthesis-associated responses, whereas material differences were significant only for MTT absorbance. Mechanisms were not investigated; the milled material (TEMPO-CAD) is not primarily a denture base material, so findings should not be generalized.

Schlagwörter

Stichwörter der Autor:innen

3D printingCAD/CAMPMMAcytotoxicitydenture base resindenture cleansershuman gingival fibroblasts

Autor:innen und Institutionen

  • Department of Prosthodontics, School of Dentistry, Istanbul Medipol University, Istanbul 34810, Türkiye.

ORCID-Profile: Rumeysa Bayram Büyükokuroğlu

Zitieren

APA

Bayram Büyükokuroğlu, R., & Sayın Özel, G. (2026). Cytotoxic Effects of Milled, 3D-Printed, and Conventional Methacrylate-Based Resins After Exposure to Denture Cleansers: A Preliminary In Vitro Screening Study. Materials, 19(21), 4761. https://doi.org/10.3390/ma19214761

Vancouver

Bayram Büyükokuroğlu R, Sayın Özel G. Cytotoxic Effects of Milled, 3D-Printed, and Conventional Methacrylate-Based Resins After Exposure to Denture Cleansers: A Preliminary In Vitro Screening Study. Materials. 2026;19(21):4761. doi:10.3390/ma19214761

BibTeX
@article{BayramBykokurolu2026,
  author = {Bayram Büyükokuroğlu, Rumeysa and Sayın Özel, Gülsüm},
  title = {Cytotoxic Effects of Milled, 3D-Printed, and Conventional Methacrylate-Based Resins After Exposure to Denture Cleansers: A Preliminary In Vitro Screening Study},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4761},
  doi = {10.3390/ma19214761}
}
Kostenlos starten →