In vitro bonding strength of denture teeth to denture base in CAD/CAM-milled, 3D-printed and conventional manufacturing processes
Clinical Oral Investigations · 07.12.2024 · 29 (1)
DOI: 10.1007/s00784-024-06099-y ↗Kurz gefasst
Fachartikel in der Zeitschrift Clinical Oral Investigations, online erschienen am 07.12.2024. Verfasst von Marcel Löscher und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthetic Dentistry, UKR University Hospital Regensburg, 93042, Regensburg, Germany. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Denture Bases, Computer-Aided Design, Dental Stress Analysis. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universitätsklinikum Regensburg.
Abstract (Originalsprache)
Objectives
To investigate the survival rates and fracture resistance of dentures made from different teeth (milled, 3D-printed, fabricated), bases (milled, 3D-printed, pressed) and bonding combinations. Materials and methods Specimens (11 groups, n = 8 per group) were fabricated from combinations with a denture tooth (anterior tooth 21) and a denture base material. The groups consisted of combinations of teeth (6x), denture base materials (5x) and adhesive bonding options (4x). The teeth were printed, milled or prefabricated. The denture base was produced conventionally or was milled or 3D-printed. Two dentures were milled from one industrially produced block. The dentures were subjected to thermal and mechanical loading (TCML) and subsequent fracture test. Statistics: ANOVA, Bonferroni-test, Kaplan-Meier survival, Pearson correlation; α = 0.05.
Results
Mean loading cycles varied between 221,869 (8), 367,610 (11), 513,616 (6) 875,371 (3) and 9,000,030 (4). ANOVA revealed significant ( p ≤ 0.001) different surviving cycles. Log Rank test showed significantly ( p < 0.001) different loading cycles. Fracture force after TCML varied between 129.8 +/- 97.1 N (3) and 780.8 +/- 62.5 N (9). ANOVA comparison revealed significant ( p < 0.001) different fracture loadings between the individual systems. Correlation was found between fracture force and loading cycles (0.587, p < 0.001).
Conclusions
Different survival rates and fracture forces were found for dentures made of different teeth (milled, 3D-printed, prefabricated), bases (milled, 3D-printed, pressed) and bonding combinations. Milled, pressed and prefabricated systems provided longer survival and fracture force than the other tested systems. Clinical relevance Optimal tooth-base combinations can help to produce a denture that is stable and resistant during clinical application.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Prosthetic Dentistry, UKR University Hospital Regensburg, 93042, Regensburg, Germany.
- Department of Prosthetic Dentistry, UKR University Hospital Regensburg, 93042, Regensburg, Germany. martin.rosentritt@ukr.de.
Förderung
- Universitätsklinikum Regensburg
Zitieren
APA
Löscher, M., Hahnel, S., Lang, R., & Rosentritt, M. (2024). In vitro bonding strength of denture teeth to denture base in CAD/CAM-milled, 3D-printed and conventional manufacturing processes. Clinical Oral Investigations, 29(1). https://doi.org/10.1007/s00784-024-06099-y
Vancouver
Löscher M, Hahnel S, Lang R, Rosentritt M. In vitro bonding strength of denture teeth to denture base in CAD/CAM-milled, 3D-printed and conventional manufacturing processes. Clinical Oral Investigations. 2024;29(1). doi:10.1007/s00784-024-06099-y
BibTeX
@article{Lscher2024,
author = {Löscher, Marcel and Hahnel, Sebastian and Lang, Reinhold and Rosentritt, Martin},
title = {In vitro bonding strength of denture teeth to denture base in CAD/CAM-milled, 3D-printed and conventional manufacturing processes},
journal = {Clinical Oral Investigations},
year = {2024},
volume = {29},
number = {1},
doi = {10.1007/s00784-024-06099-y}
}
EUVIMED