EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Color and Translucency Variation of a One-Shaded Resin-Based Composite after Repeated Heating Cycles and Staining

Corina Mirela Prodan, Cristina Gasparik iD, Javier Ruiz-López iD, Diana Dudea iD

Materials · 17.05.2023 · 16 (10) · 3793

DOI: 10.3390/ma16103793 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.05.2023. Verfasst von Corina Mirela Prodan und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthetic Dentistry and Dental Materials, Iuliu Hatieganu University of Medicine and Pharmacy, 400012 Cluj-Napoca, Romania. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Iuliu Hațieganu University of Medicine and Pharmacy, Iuliu Hatieganu University of Medicine and Pharmacy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

(1)

Background

This study aimed to determine the effect of repeated pre-polymerization heating on the color and translucency of a one-shaded resin-based composite and to evaluate whether the heating cycles affect its color stability. (2)

Methods

Fifty-six samples of 1-mm thickness were fabricated from Omnichroma (OM) after applying different heating cycles (for one, five, and ten times at 45 °C) before polymerization (n = 14/group) and afterwards were stained with a yellow dye solution. CIE L*, a*, b*, C*, h° coordinates were recorded, and color differences, whiteness, and translucency were calculated, before and after staining. (3)

Results

Heating cycles significantly influenced the color coordinates, WID00, and TP00 of OM being higher after one heating cycle and decreasing as the number of heating cycles increased. The color coordinates, WID, and TP00 after staining significantly differed for each group. The color and whiteness differences calculated after staining exceeded the acceptability thresholds for all groups. The color and whiteness variations after staining were clinically unacceptable. (4)

Conclusions

Repeated pre-polymerization heating induces a clinically acceptable color and translucency change to OM. Although the color changes resulting after staining are clinically unacceptable, increasing the number of heating cycles up to ten times slightly reduces the color differences.

Schlagwörter

Stichwörter der Autor:innen

color differencecolor stabilityheatingone-shaded resin-based composite

Autor:innen und Institutionen

  • Department of Prosthetic Dentistry and Dental Materials, Iuliu Hatieganu University of Medicine and Pharmacy, 400012 Cluj-Napoca, Romania.
  • Department of Optics, Faculty of Science, Campus de Fuente Nueva, Edificio Mecenas, University of Granada, ibs-Granada, 18071 Granada, Spain.

ORCID-Profile: Cristina Gasparik, Javier Ruiz-López, Diana Dudea

Förderung

  • Iuliu Hațieganu University of Medicine and Pharmacy
  • Iuliu Hatieganu University of Medicine and Pharmacy

Zitieren

APA

Prodan, C. M., Gasparik, C., Ruiz-López, J., & Dudea, D. (2023). Color and Translucency Variation of a One-Shaded Resin-Based Composite after Repeated Heating Cycles and Staining. Materials, 16(10), 3793. https://doi.org/10.3390/ma16103793

Vancouver

Prodan CM, Gasparik C, Ruiz-López J, Dudea D. Color and Translucency Variation of a One-Shaded Resin-Based Composite after Repeated Heating Cycles and Staining. Materials. 2023;16(10):3793. doi:10.3390/ma16103793

BibTeX
@article{Prodan2023,
  author = {Prodan, Corina Mirela and Gasparik, Cristina and Ruiz-López, Javier and Dudea, Diana},
  title = {Color and Translucency Variation of a One-Shaded Resin-Based Composite after Repeated Heating Cycles and Staining},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {10},
  pages = {3793},
  doi = {10.3390/ma16103793}
}
Kostenlos starten →