Color and Translucency Compatibility Among Various Resin-Based Composites and Layering Strategies
Dentistry Journal · 18.04.2025 · 13 (4) · 173
DOI: 10.3390/dj13040173 ↗Kurz gefasst
Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 18.04.2025. Verfasst von Elena Bianca Varvara und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthetic Dentistry and Dental Materials, Iuliu Hațieganu University of Medicine and Pharmacy, 400006 Cluj-Napoca, Romania. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Iuliu Hațieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania.
Abstract (Originalsprache)
(1)
Background
Natural-looking dental restorations require careful selection of the restorative material, with color and translucency characteristics similar to the natural dental structures. (2)
Objectives
This research aimed to evaluate if there is compatibility regarding the color and translucency between different commercial RBCs in different layering recipes. (3)
Methods
Sixty 1 mm thick disk specimens were produced from three different RBCs: ESS (Essentia-GC), BEG (Brilliant Ever Glow-Coltene), and IPS (IPS Empress Direct-Ivoclar Vivadent). Three different opacities and translucencies (enamel, dentin, and opaque shades) from each system were used in four recipes (R1-enamel, R2-dentin, R3-enamel and dentin, R4-enamel, dentin, and opaque) to obtain single-, double-, and triple-layered samples, respecting the anatomical layering technique. CIE L*, a*, b*, C*, h0 coordinates were recorded, and the relative translucency parameter (RTP00) was calculated. Further, the color differences (ΔE00) and the difference in translucencies ΔRTP00 were analyzed between the materials and between the layered recipes. (4)
Results
The CIE L* and h° color coordinates and RTP00 showed significant differences among all three RBCs for all four recipes (p < 0.001). The decreasing order of translucency for each recipe was R1: ESS > BEG > IPS, R2 and R3: BEG > IPS > ESS, R4: BEG > ESS > IPS. Important differences were found in color and translucency among the recipes for each of the three RBCs tested (p < 0.001). The decreasing order of translucency for the tested RBCs was ESS: R1 > R3 > R4 > R2, BEG and IPS: R1 > R3 > R2 > R4. (5)
Conclusions
No significant compatibility was observed in color and translucency among different layering recipes of the same composite materials nor between similar layering recipes when using different composites. The color differences between materials were more significant than the differences in translucency for each recipe.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Prosthetic Dentistry and Dental Materials, Iuliu Hațieganu University of Medicine and Pharmacy, 400006 Cluj-Napoca, Romania.
- Department of Optics, Faculty of Science, Campus de Fuente Nueva, Edificio Mecenas, University of Granada, ibs-Granada, 18071 Granada, Spain.
ORCID-Profile: Elena Bianca Varvara, Cristina Gasparik, Javier Ruiz-López, Diana Dudea
Förderung
- Iuliu Hațieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania
Zitieren
APA
Varvara, E. B., Gasparik, C., Ruiz-López, J., Aghiorghiesei, A. I., Culic, B., & Dudea, D. (2025). Color and Translucency Compatibility Among Various Resin-Based Composites and Layering Strategies. Dentistry Journal, 13(4), 173. https://doi.org/10.3390/dj13040173
Vancouver
Varvara EB, Gasparik C, Ruiz-López J, Aghiorghiesei AI, Culic B, Dudea D. Color and Translucency Compatibility Among Various Resin-Based Composites and Layering Strategies. Dentistry Journal. 2025;13(4):173. doi:10.3390/dj13040173
BibTeX
@article{Varvara2025,
author = {Varvara, Elena Bianca and Gasparik, Cristina and Ruiz-López, Javier and Aghiorghiesei, Alexandra Iulia and Culic, Bogdan and Dudea, Diana},
title = {Color and Translucency Compatibility Among Various Resin-Based Composites and Layering Strategies},
journal = {Dentistry Journal},
year = {2025},
volume = {13},
number = {4},
pages = {173},
doi = {10.3390/dj13040173}
}
EUVIMED