Effect of Different Artificial Staining Procedures on the Color Stability and Translucency of a Nano-Hybrid Resin-Based Composite
Materials · 14.03.2023 · 16 (6) · 2336
DOI: 10.3390/ma16062336 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 14.03.2023. Verfasst von Gaetano Paolone und 6 weiteren Autor:innen. Beteiligte Einrichtung: Dental School, IRCCS San Raffaele Hospital, Vita-Salute University, 20132 Milan, Italy. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Background
To evaluate the effect of different experimental staining procedures on color stability and translucency of a nano-hybrid resin-based composite (RBC).
Methods
Forty-eight cylindrical-shaped specimens (10 × 2 mm) were prepared with a nano-hybrid RBC (Clearfil Majesty ES-2) and randomly divided in four groups according to the experimental staining procedure: G1) static immersion in a staining solution (coffee) (44 ± 1 °C); G2) staining cycling between coffee (44 ± 1°C) and distilled water (37 ± 1°C) with an experimental staining machine based on Arduino, an Open Source hardware development platform; G3) staining cycles as in G2 + brushing with a low abrasive toothpaste (Relative Dentin Abrasion RDA = 30) (Elmex Sensitive Professional); G4) staining cycles as in G3, with brushing performed with a very strong abrasive toothpaste (RDA = 90) (Lacult Active). Color parameters were recorded at the baseline (T0) after staining procedures (T1) and repolishing (T2) using a spectrophotometer. Color change (∆E00) and translucency (TP, CR) were evaluated. Data were statistically analyzed (p < 0.05).
Results
For ∆E00 after staining, Group 1 showed the highest color change and Group 3 the lowest. All groups were significantly different (p < 0.001) except for Group 2 vs. Group 4; after repolishing, Group 1 was significantly higher than Group 3 (p < 0.001), Group 2 (p < 0.001), and Group 4 (p = 0.003); Group 2 was higher than Group 3 (p < 0.001). For TP variable, after staining procedures, Group 2 was significantly higher than all other groups (p < 0.001), and Group 1 was significantly higher than Group 3 (p < 0.001) and Group 4 (p = 0.007). After repolishing, Group 4 was significantly lower than Group 3 (p = 0.008) and Group 2 (p = 0.027). Repolishing procedure significantly reduced color parameters.
Conclusions
The investigated staining procedure induced significant differences in color stability and translucency. The use of a very strong abrasive toothpaste (RDA = 90) induced higher color change than a low abrasive one (RDA = 30). Repolishing procedures are able to partially reduce color change induced by artificial staining procedures.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Dental School, IRCCS San Raffaele Hospital, Vita-Salute University, 20132 Milan, Italy.
- Department of Biomedical and Neuromotor Sciences, DIBINEM, University of Bologna-Alma Mater Studiorum, Via San Vitale 59, 40125 Bologna, Italy.
- Dental Academy, University of Portsmouth, William Beatty Building, Hampshire Terrace, Portsmouth PO1 2QG, UK.
ORCID-Profile: Gaetano Paolone, Lorenzo Breschi, Alessandro Vichi
Zitieren
APA
Paolone, G., Mazzitelli, C., Boggio, F., Breschi, L., Vichi, A., Gherlone, E., & Cantatore, G. (2023). Effect of Different Artificial Staining Procedures on the Color Stability and Translucency of a Nano-Hybrid Resin-Based Composite. Materials, 16(6), 2336. https://doi.org/10.3390/ma16062336
Vancouver
Paolone G, Mazzitelli C, Boggio F, Breschi L, Vichi A, Gherlone E, et al. Effect of Different Artificial Staining Procedures on the Color Stability and Translucency of a Nano-Hybrid Resin-Based Composite. Materials. 2023;16(6):2336. doi:10.3390/ma16062336
BibTeX
@article{Paolone2023,
author = {Paolone, Gaetano and Mazzitelli, Claudia and Boggio, Francesca and Breschi, Lorenzo and Vichi, Alessandro and Gherlone, Enrico and Cantatore, Giuseppe},
title = {Effect of Different Artificial Staining Procedures on the Color Stability and Translucency of a Nano-Hybrid Resin-Based Composite},
journal = {Materials},
year = {2023},
volume = {16},
number = {6},
pages = {2336},
doi = {10.3390/ma16062336}
}
EUVIMED