EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Color Stability of Resin Cements after Water Aging

Claudia Mazzitelli, Gaetano Paolone iD, Joseph Sabbagh iD, Nicola Scotti iD, Alessandro Vichi iD

Polymers · 27.01.2023 · 15 (3) · 655

DOI: 10.3390/polym15030655 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 27.01.2023. Verfasst von Claudia Mazzitelli und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical and Neuromotor Sciences DIBINEM, University of Bologna, 40125 Bologna, Italy. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The color stability of resin cements plays a key role in the achievement of esthetically-pleasant restorations. Resin luting materials can be mainly divided into two main classes: adhesive (relying on previous application of adhesive systems) or self-adhesive (also known as one-step cements). The different chemical compositions determine their physio-mechanical characteristics which, in turns, influence their color stability. To evaluate the color variations of different dual-cured resin cements after water aging, 80 disc-shaped specimens (15 mm in diameter and 1.2 mm thick) were obtained from the following resin cements (n = 10): (1) Maxcem Elite Universal, MCU (Kerr); (2) RelyX Universal, RXU (3M); (3) Calibra Ceram, CAL (Dentsply); (4) Multilink, MUL (Ivoclar-Vivadent); (5) Panavia V5, PAN (Kuraray); (6) Calibra Universal, CUN (Dentsply); (7) SpeedCEM Plus, SCP (Ivoclar); and (8) Panavia SA, PSA (Kuraray). After light-polymerization, the specimens were measured with a spectrophotometer and CIELab* values were recorded. The specimens were then placed in a digitally controlled thermostatic water bath at 60° for 30 days and afterwards the color measurements were repeated. Color differences were calculated for each specimen before and after water-aging procedures with ΔEab formula and the data were statistically analyzed (p < 0.05). The type of cement statistically influenced the ΔEab (p < 0.05), with MCU showing the lowest color variations (4.3 ± 0.7) whereas RXU and PSA the highest (16.9 ± 1.6 and 16.8 ± 1.2, respectively). No differences were observed between CAL, CUN and SCP (p = 0.05). Color stability is related to the chemical composition of the resinous luting materials, thus material dependent.

Schlagwörter

Stichwörter der Autor:innen

color stabilitydual-cureresin cementself-adhesive cementwater aging

Autor:innen und Institutionen

  • Department of Biomedical and Neuromotor Sciences DIBINEM, University of Bologna, 40125 Bologna, Italy.
  • Department of Dentistry, IRCCS, San Raffaele Hospital, Dental School, Vita Salute University, 20158 Milan, Italy.
  • Department of Restorative Dentistry and Endodontics, Lebanese University, Beirut 1533, Lebanon.
  • Department of Surgical Sciences, Dental School Lingotto, University of Turin, 10126 Turin, Italy.
  • Dental Academy, University of Portsmouth, William Beatty Building, Hampshire Terrace, Portsmouth PO1 2QG, UK.

ORCID-Profile: Gaetano Paolone, Joseph Sabbagh, Nicola Scotti, Alessandro Vichi

Zitieren

APA

Mazzitelli, C., Paolone, G., Sabbagh, J., Scotti, N., & Vichi, A. (2023). Color Stability of Resin Cements after Water Aging. Polymers, 15(3), 655. https://doi.org/10.3390/polym15030655

Vancouver

Mazzitelli C, Paolone G, Sabbagh J, Scotti N, Vichi A. Color Stability of Resin Cements after Water Aging. Polymers. 2023;15(3):655. doi:10.3390/polym15030655

BibTeX
@article{Mazzitelli2023,
  author = {Mazzitelli, Claudia and Paolone, Gaetano and Sabbagh, Joseph and Scotti, Nicola and Vichi, Alessandro},
  title = {Color Stability of Resin Cements after Water Aging},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {3},
  pages = {655},
  doi = {10.3390/polym15030655}
}
Kostenlos starten →