EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitSystematische ÜbersichtOpen Access · CC BY 4.0

The Shear Bond Strength between Milled Denture Base Materials and Artificial Teeth: A Systematic Review

Vladimir Prpic iD, Amir Catic iD, Sonja Kraljevic Simunkovic, Lana Bergman iD, Samir Cimic

Dentistry Journal · 01.03.2023 · 11 (3) · 66

DOI: 10.3390/dj11030066 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Dentistry Journal, online erschienen am 01.03.2023. Verfasst von Vladimir Prpic und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Fixed Prosthodontics, School of Dental Medicine, University of Zagreb, 10000 Zagreb, Croatia. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The data about bond strength between digitally produced denture base resins and artificial teeth are scarce. Several studies investigated shear bond strength values of milled denture base resins and different types of artificial teeth. The purpose of the present study was to compare and evaluate the available evidence through a systematic review. A bibliographic search was conducted in PubMed, Scopus, and Web of Science to assess adequate studies published up to 1 June 2022. This review followed the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. The appropriate studies that determined the shear bond strength values between milled denture base resins and artificial teeth were selected. The initial search identified 103 studies, which were included in the PRISMA 2020 flow diagram for new systematic reviews. Three studies met the inclusion criteria, and all of them present a moderate risk of bias (score 6). Two studies found no statistical differences between heat-polymerized and CAD/CAM (milled) denture base materials when attached with different types of artificial teeth, while one study showed higher values of CAD/CAM (milled) denture base materials. Bonding agents ensure bonding strength at least similar to the conventional methods. In order to improve the quality of future studies, it would be advantageous to use a larger number of specimens with standardized dimensions and a blinded testing machine operator to decrease the risk of bias.

Schlagwörter

Stichwörter der Autor:innen

CAD/CAMPRISMA 2020artificial teethdentures

Autor:innen und Institutionen

  • Department of Fixed Prosthodontics, School of Dental Medicine, University of Zagreb, 10000 Zagreb, Croatia.
  • Department of Prosthodontics, University Hospital Centre Zagreb, 10000 Zagreb, Croatia.
  • Department of Removable Prosthodontics, School of Dental Medicine, University of Zagreb, 10000 Zagreb, Croatia.

ORCID-Profile: Vladimir Prpic, Amir Catic, Lana Bergman

Zitieren

APA

Prpic, V., Catic, A., Kraljevic Simunkovic, S., Bergman, L., & Cimic, S. (2023). The Shear Bond Strength between Milled Denture Base Materials and Artificial Teeth: A Systematic Review. Dentistry Journal, 11(3), 66. https://doi.org/10.3390/dj11030066

Vancouver

Prpic V, Catic A, Kraljevic Simunkovic S, Bergman L, Cimic S. The Shear Bond Strength between Milled Denture Base Materials and Artificial Teeth: A Systematic Review. Dentistry Journal. 2023;11(3):66. doi:10.3390/dj11030066

BibTeX
@article{Prpic2023,
  author = {Prpic, Vladimir and Catic, Amir and Kraljevic Simunkovic, Sonja and Bergman, Lana and Cimic, Samir},
  title = {The Shear Bond Strength between Milled Denture Base Materials and Artificial Teeth: A Systematic Review},
  journal = {Dentistry Journal},
  year = {2023},
  volume = {11},
  number = {3},
  pages = {66},
  doi = {10.3390/dj11030066}
}
Kostenlos starten →