The Influence of Nanoparticle Dispersions on Mechanical and Thermal Properties of Polymer Nanocomposites Using SLA 3D Printing
Crystals · 07.02.2023 · 13 (2) · 285
DOI: 10.3390/cryst13020285 ↗Kurz gefasst
Fachartikel in der Zeitschrift Crystals, online erschienen am 07.02.2023. Verfasst von Mussadiq Shah und 7 weiteren Autor:innen. Die Arbeit wurde bisher 65-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement, National Natural Science Foundation of China, Natural Science Foundation of Shaanxi Province.
Abstract (Originalsprache)
The synergistic integration of nanocomposites and 3D printing has opened a gateway to the future and is soon expected to surpass its rivalry with traditional manufacturing techniques. However, there is always a challenge associated with preparing a nanocomposite resin for polymerization-based 3D printing, which is the agglomeration of nanoparticles. Due to the high surface-area-to-volume ratio, the nanoparticles form clusters in the composite matrix, which affects the final properties. This paper aims to analyze the effects of graphene oxide (GO) dispersion on the mechanical and thermal properties of 3D-printed nanocomposites. In particular, a well-dispersed sonication dispersion route is employed for analyzing high and poor GO dispersions and their effects on different properties. After different microscopic analyses and testing, the optimum sonication condition was 30 min at an amplitude of 70%. In terms of mechanical properties, both tensile and compression strength first increased and then decreased gradually with different dispersions as well as varying GO concentrations. Furthermore, there was less or no effect on thermal stability. GO of 0.05 wt.% had the highest compression and tensile strength, while beyond 0.05 to 0.5 wt.%, both strengths reduced slowly. These 3D-printed nanocomposites have found their application in automotive, sports, and biomedical fields.
Förderung
- European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement
- National Natural Science Foundation of China
- Natural Science Foundation of Shaanxi Province
- Scientific and Technological Research Council of Turkiye (TUBITAK) under TUBITAK’s 2236/B program
Zitieren
APA
Shah, M., Ullah, A., Azher, K., Rehman, A. U., Akturk, N., Juan, W., Tüfekci, C. S., & Salamci, M. U. (2023). The Influence of Nanoparticle Dispersions on Mechanical and Thermal Properties of Polymer Nanocomposites Using SLA 3D Printing. Crystals, 13(2), 285. https://doi.org/10.3390/cryst13020285
Vancouver
Shah M, Ullah A, Azher K, Rehman AU, Akturk N, Juan W, et al. The Influence of Nanoparticle Dispersions on Mechanical and Thermal Properties of Polymer Nanocomposites Using SLA 3D Printing. Crystals. 2023;13(2):285. doi:10.3390/cryst13020285
BibTeX
@article{Shah2023,
author = {Shah, Mussadiq and Ullah, Abid and Azher, Kashif and Rehman, Asif Ur and Akturk, Nizami and Juan, Wang and Tüfekci, Celal Sami and Salamci, Metin Uymaz},
title = {The Influence of Nanoparticle Dispersions on Mechanical and Thermal Properties of Polymer Nanocomposites Using SLA 3D Printing},
journal = {Crystals},
year = {2023},
volume = {13},
number = {2},
pages = {285},
doi = {10.3390/cryst13020285}
}
EUVIMED