EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of 3D Printing Conditions on Physical–Mechanical Properties of Polymer Materials

Lubomír Beníček iD, Martin Vašina iD, Pavel Hrbáček iD

Polymers · 28.12.2024 · 17 (1) · 43

DOI: 10.3390/polym17010043 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 28.12.2024. Verfasst von Lubomír Beníček und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Technology, Tomas Bata University in Zlin, Vavreckova 5669, 760 01 Zlin, Czech Republic. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union and the state budget of the Czech Republic, Materials and Technologies for Sustainable Development.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The popularity of 3D printing technology is rapidly increasing worldwide. It can be applied to metals, ceramics, composites, hybrids, and polymers. Three-dimensional printing has the potential to replace conventional manufacturing technologies because it is cost effective and environmentally friendly. This paper focuses on the influence of 3D printing conditions on the physical and mechanical properties of polylactic acid (PLA), poly(methyl methacrylate) (PMMA), and poly(ethylene terephthalate glycol-modified) (PETG) materials produced using Fused Deposition Modeling (FDM) technology. The impact of nozzle diameter, layer height, and printing temperature on the mechanical (i.e., bending stiffness and vibration damping) and physical (i.e., sound absorption and light transmission) properties of the studied polymer materials was investigated. It can be concluded that 3D printing conditions significantly influenced the structure and surface shape of the 3D-printed polymer samples and, consequently, their physical and mechanical properties. Therefore, it is essential to consider the type of filament used and the 3D printing conditions for specific 3D-printed material applications.

Schlagwörter

Stichwörter der Autor:innen

3D printing conditionslight transmissionmechanical vibrationmicroscopypolymer materialssound absorptionthree-point bend

Autor:innen und Institutionen

  • Faculty of Technology, Tomas Bata University in Zlin, Vavreckova 5669, 760 01 Zlin, Czech Republic.
  • Faculty of Mechanical Engineering, Department of Hydromechanics and Hydraulic Equipment, VŠB-Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Ostrava-Poruba, Czech Republic.

ORCID-Profile: Lubomír Beníček, Martin Vašina, Pavel Hrbáček

Förderung

  • European Union and the state budget of the Czech Republic
  • Materials and Technologies for Sustainable Development

Zitieren

APA

Beníček, L., Vašina, M., & Hrbáček, P. (2024). Influence of 3D Printing Conditions on Physical–Mechanical Properties of Polymer Materials. Polymers, 17(1), 43. https://doi.org/10.3390/polym17010043

Vancouver

Beníček L, Vašina M, Hrbáček P. Influence of 3D Printing Conditions on Physical–Mechanical Properties of Polymer Materials. Polymers. 2024;17(1):43. doi:10.3390/polym17010043

BibTeX
@article{Benek2024,
  author = {Beníček, Lubomír and Vašina, Martin and Hrbáček, Pavel},
  title = {Influence of 3D Printing Conditions on Physical–Mechanical Properties of Polymer Materials},
  journal = {Polymers},
  year = {2024},
  volume = {17},
  number = {1},
  pages = {43},
  doi = {10.3390/polym17010043}
}
Kostenlos starten →