EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of printing orientation on mechanical properties of SLA 3D‐printed photopolymer

Yifan Li, Zhenjie Teng

Fatigue & Fracture of Engineering Materials & Structures · 2024-05 · 47 (5) · 1531-1545

DOI: 10.1111/ffe.14265 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 13.02.2024. Verfasst von Yifan Li und 1 weiteren Autor:innen. Die Arbeit wurde bisher 66-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Herein, we conducted tensile and fracture tests on a photopolymer produced with a stereolithography apparatus (SLA), utilizing dog‐bone and semi‐circular bending specimens fabricated in five different orientations. The analysis revealed a direct linear correlation between the tensile strength and printing orientation, highlighting a decrease in tensile strength with an increase in orientation angle. Young's modulus of the printed material remained insensitive to the printing orientation. Conversely, fracture toughness demonstrated a distinct cubic polynomial relationship with the printing orientation. The equivalent material concept in conjunction with the maximum tangential stress criterion was used to predict the fracture behavior of SLA printed polymer. This research sheds light on the significant effect of printing orientation on the mechanical properties of SLA printed materials, offering pivotal insights for optimizing SLA printing across various applications and catalyzing progress in this research field.

Zitieren

APA

Li, Y., & Teng, Z. (2024). Effect of printing orientation on mechanical properties of SLA 3D‐printed photopolymer. Fatigue & Fracture of Engineering Materials & Structures, 47(5), 1531-1545. https://doi.org/10.1111/ffe.14265

Vancouver

Li Y, Teng Z. Effect of printing orientation on mechanical properties of SLA 3D‐printed photopolymer. Fatigue & Fracture of Engineering Materials & Structures. 2024;47(5):1531-1545. doi:10.1111/ffe.14265

BibTeX
@article{Li2024,
  author = {Li, Yifan and Teng, Zhenjie},
  title = {Effect of printing orientation on mechanical properties of SLA 3D‐printed photopolymer},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2024},
  volume = {47},
  number = {5},
  pages = {1531--1545},
  doi = {10.1111/ffe.14265}
}
Kostenlos starten →